Page History

The list of cameras specified in the configuration panel for the Partition Of Control object defines the cameras whose archives can be accessed through the Search in Archive interface object (see the document Monitoring Software Package: Operator's Guide). In addition, this list defines the cameras whose state and archives are monitored by Agent of Control.

Depending on whether the list of cameras has been specified or not, the following situations are possible:

...

In the second and third cases, monitoring is performed of the state of the system (network functioning, restarts, etc.) and disks (their number and free space). The state of cameras and their archives is not available for monitoring.Note:

To configure the list of cameras in use:

...

1. Go to the configuration panel for the Partition Of Control object (Fig. 4.3 – 4.3—13).

...

1. 
   Image Added

...

1. Click the Cameras... button (see Fig. 4. 3 – 4.3—13). The Add/edit cameras window opens (Fig. 4.3 – 4.3—14).

...

1. 
   Image Added

1. Configure the necessary cameras by clicking the and buttonsto the Image Added and Image Added buttons to move cameras from the left list to the one on the right (see Fig. 4.3 – 4.3—14, 1).
2. Select cameras in the list on the right.
3. Specify the time for video archive storage, in days (see Fig. 4.3 – 4.3—14, 2).
4. Click the Set for cameras selected in the right list button.
5. Repeat steps 4 to 6 for all necessary cameras.
6. Click the Apply changes and close button (see Fig. 4.3 – 4.3—14, 3). The selected cameras will be added to the list on the configuration panel of the Security Site object.
7. Click the Apply button.

 Note:

 
Configuration of the camera list is now complete.