Page History

...

1. Check the Enable box to activate the rule.  
2. In the Sign column: select the sign that will define the value range. The list of recognized signs differs for each supported value type, see the table below.
3. In the Value column: enter the value. The value must match the formatting rules for the value type of the BACNet parameter the rule is configured for, see Configuring the parameters of BACnet channels and the table below. 
   OR
   In the Minimum value and Maximum value fields: specify the interval the value must fall into.
4. In the Red, Green and Blue columns: define the indicator colour according to the RGB model.
5. Click the Apply button to save the changes.

Image Added

Image Removed

 Click the Apply button to save the changes.