Go to documentation repository
Page History
...
Address | Example | Description |
rtsp://ServerIP address[:Port]/CameraNo[?stream_id=StreamID] | rtsp://127.0.0.1/1 | Viewing default stream from Camera 1 if default port is in use. |
| rtsp://127.0.0.1:555/1 | Viewing default stream from Camera 1 when broadcasting in Multicast mode if default port 555 is in use. Note. Connection to the RTSP stream is performed via the broadcasting adapter IP-address, not by the destination IP which is specified in the settings panel of the RTSP Server and is used internally. | |
| rtsp://127.0.0.1:555/7?stream_id=7.2 | Viewing second stream from Camera 7 when broadcasting in Multicast mode if default port 555 is in use. | |
| rtsp://Login:Password@ServerIP address[:Port]/CameraNo | rtsp://login:pass@127.0.0.1:554/1 | Viewing video signal from Camera 1 if users and permissions are configured in Intellect (see Rights administration). |
| rtsp://login:pass@127.0.0.1:555/1 | Viewing video signal from Camera 1 in Multicast mode if users and permissions are configured in Intellect. | |
| rtsp://Server IP address[:Port]/CameraNo?mic_id=Microphone ID | rtsp://127.0.0.1:555/15?mic_id=1 | Viewing video from Camera 15 with sound. |
| rtsp:// Server IP address[:Port]/?mic_id= Microphone ID | rtsp://127.0.0.1:555/?mic_id=1 | Getting sound only from microphone 1 with no video from any camera. |
rtsp:// ServerIP address[:Port]/archive?id= CameraNo.&time_begin=yyyy.mm.dd-hh:mm:ss&&time_end= yyyy.mm.dd-hh:mm:ss | rtsp://127.0.0.1:554/archive?id=1&time_begin=2011.11.11-11:11:11&&time_end=2011.11.11-11:12:00 | Viewing video archive from Camera 1 for specified time period. |
| rtsp:// Server IP address[:Port]/archive?id=CameraNo&mic_id= Microphone ID &time_begin=yyyy.mm.dd-hh:mm:ss&&time_end= yyyy.mm.dd-hh:mm:ss | rtsp://127.0.0.1:554/archive?id=1&mic_id=1&time_begin=2011.11.11-11:11:11&&time_end=2011.11.11-11:12:00 | Viewing video archive from Camera 1 with sound from microphone 1 for specified time period. |
| rtsp://ServerIP address[:Port]/archive?id=CameraNo.&time_begin=yyyymmddThhmmssZ&time_end=yyyymmddThhmmssZ | rtsp://127.0.0.1:555/archive?id=1&time_begin=20160331T080000Z&time_end=20160331T080800Z | Viewing video archive from Camera 1 for specified time period. |
| rtsp://ServerIP address[:Port]/archive?id=CameraNo.&time_begin=yyyymmddThhmmssZ | rtsp://127.0.0.1:555/archive?id=4&time_begin=20160316T065000Z | Viewing video archive from Camera 4 from specific start time till the archive end (as the value of time_end is not specified in the address). |
| rtsp://ServerIP address[:Port]/archive?id=CameraNo | rtsp://127.0.0.1:555/archive?id=4 | Viewing video archive from Camera 4 from the beginning till the end. |
| rtsp://ServerIP address[:Port]/archive?id=CameraNo.&long_term_archive=BackupArchiveNo | rtsp://127.0.0.1:559/archive?id=1&long_term_archive=2 | Viewing Camera 1 video archive from Backup archive 2. |
| rtsp://Server IP address[:Port]/archive?id=CameraNo.&gate=VideogateNo | rtsp://127.0.0.1:559/archive?id=1&gate=3 | Viewing Camera 1 video archive from Video gate 3. |
| rtsp://Server IP address[:Port]/archive?id=CameraNo.&time_begin=yyyymmddThhmmssZ&time_end=yyyymmddThhmmssZ&z=PlayBackSpeed | rtsp://127.0.0.1:554/archive?id=2&time_begin=20171120T102000Z&time_end=20171120T104000Z&z=-1 | Speed-down playing back video archive of Camera 2 for the specified period of time. Value of z parameter greater than 0 (valid values are 2, 4, 6 ... 16) enables speed-up archive playback. If the parameter z is less than 0 (valid values are -1, -2, ... -16), then the archive is played back in the reverse order with the corresponding acceleration. Only key frames are played back at reverse playing. |
...
Overview
Content Tools