Go to documentation repository
Page History
...
AUTO Intellect | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\LPRVIEWER | protocollimit | <1000 | - | 4.7.5 and later | Sets number of lines shown in the protocol (this parameter is for testing only). |
x32: (x32)\radar | EmulateRefreshSpeed | 1 - 2147483647 | 100 | 4.7.5 and later | Radar emulator. Sets time period (ms) for refreshing data about speed in the radar emulation mode. 0 value blocks data refreshing. |
x32: (x32)\radar | WriteSpeedOnTitles | 0, 1 | 0 | 4.7.5 and later | Defines whether to write speed values on titles. |
x32: (x32)\URMLPR | DisableUrmOutput | 0, 1 | 0 | 4.7.5 and later | Disables results output. |
x32: (x32)\URMLPR | GlobalUrmDebug | 0, 1 | 0 | 4.7.5 and later | Enables displaying CZoneInfo objects in dbgview. |
x32: (x32)\URMLPR | OneSpeedDetect | 0, 1 | 0 | 4.7.5 and later | Enables filtering the radar speed values. |
x32: (x32)\URMLPR | ReadSpeedFromTitles | 0, 1 | 0 | 4.7.5 and later | Defines whether to read speed from titles or not. |
x32: (x32)\URMLPR | TestWidth | - | 0 | 4.7.5 and later | Image width change (internal use only). |
x32: (x32)\URMLPR | TestHeight | - | 0 | 4.7.5 and later | Image height change (internal use only). |
x32: (x32)\URMLPR | Time | - | - | 4.7.5 and later | Saves time of the last viewed archive fragment in the test mode. |
x32: (x32)\URMLPR | UrmDebug | 0, 1 | 0 | 4.7.5 and later | Enables recording of tiff files to UrmDebug folder. |
x32: (x32)\URMLPR | UrmSendProcessEvents | 0, 1 | 0 | 4.7.5 and later | Sends beginning (VEHICLES_BEGIN) and ending (VEHICLES_END) parameters of license plate recognition to the core. |
x32: (x32)\URMLPR | UseTry | 0, 1 | 0 | 4.7.5 and later | Enables the seh module. |
x32: (x32)\URMLPR | WriteUraganErrorBuf | 0, 1 | 0 | 4.7.5 and later | If failure occurs, the uragan.buf file is created (only of UseTry=1). |
x32: (x32)\URMLPR\UnitTest | CountryName | Text | RUS | 4.7.5 and later | Sets the test country name. |
x32: (x32)\URMLPR\UnitTest | Enabled | 0, 1 | 0 | 4.7.5 and later | Enables/disables test. |
x32: (x32)\URMLPR\UnitTest | ExecuteSecond | > = 0 | 3 | 4.7.5 and later | Sets time of test execution. |
x32: (x32)\URMLPR\UnitTest | Number | Text | M038EH150 | 4.7.5 and later | Sets the test number. |
x32: (x32)\URMLPR\UnitTest | PlateHeightPercent | > 0 | 15 | 4.7.5 and later | Sets the test license plate height. |
x32: (x32)\URMLPR\UnitTest | PlateWidthPercent | > 0 | 25 | 4.7.5 and later | Sets the test license plate width. |
x32: (x32)\URMLPR | ParkingMode | 0, 1 | - | 5.0 | Enabling the parking mode for recognizer: 1 – parking mode is enabled. Recognition starts at ULPR|START reaction. As soon as one license plate is recognized, the recognition stops. 0 – parking mode is disabled. Recognition continues till getting the ULPR|STOP reaction. Important! For correct operation of the key make sure that the Enable on motion detection trigger checkbox is set on the settings panel of the LPR channel object corresponding to the CARMEN-parking recognition module (see Setting the joint operation of the LPR channel and the motion detector of the Intellect platform). Note. The ULPR|START and ULPR|STOP reactions are created using the scripts. Operator command, sensor triggering, motion detection tool triggering, etc. can cause the reaction. |
x32: (x32)\URMLPR | SaveRawRecognitionResult | 0,1 | 0 | 5.1 | When value = 1, the key allows saving frames transmitted from Intellect to the CARMEN Parking / CARMEN-Auto module.
When value = 1, frames are not saved. |
x32: (x32)\URMLPR | TrackOnlyRedLight | 0, 1 | 1 | 5.1 | When value = 1, the key allows fixing violations by the traffic violations detection (crossing the stop line, stop over crosswalk line, running a red light) only for vehicles which crossed the stop line on red light. |
x32: (x32)\URMLPR | MaxStoppingSpeed | 0 - 10000 | 1000 | 5.1 | Controls maximal speed in relative units (relatively from width and height of frame) at which the vehicle is still considered as the stopped vehicle (for the Stop over crosswalk line violation). |
x32: (x32)\URMLPR | RayHardwareDelay | >0 | 0 | 5.2 | Sets time (in milliseconds) corresponding to the delay with which events about green/red traffic lights are received. Example. If the key value is RayHardwareDelay=2000 and an event is received at 12:00:00, then the system thinks the event is received at 11:59:58. |
x32: (x32)\URMLPR | TimestampFontSize | >=139 | 139 | 5.2 | The key sets the text font size on the photo of the fine (containing date and time). The value is font size multiplied by 10. For instance, if the key is 139, then the font size will be 13,9pnt. |
x32: (x32)\URMLPR | ReadRayFromTitles | 0, 1 | 0 | 5.3 | The key enables the multi-stream mode emulation in IntLab. 0 – license plates recognition is performed when the ray, specified on the settings panel of the IntLab-Carriages module object, is open or closed (see Setting up the IntLab-Carriages module). 1 – information about the time when the license plates recognition is to be started is taken from the titles overlaid on the video. |
x32: (x32)\URMLPR | PlateImprover | 0, 1, 2 | 0 | 5.3 | The key sets an algorithm of frame preparation before sending it to the Carmen license plate recognition module: 0 – frames are sent to the Carmen license plate recognition module without pre-processing. 1 – rectangular areas that may contain a license plate are searched in the frame. Only those rectangular areas that may contain a license plate are then forwarded to the Carmen license plate recognition module. 2 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it tries to find another plate number, and time for recognition increases as a result. 3 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it does not try to find another license plate. |
| 0, 1, 2, 3 | 5.4 | ||||
x32: (x32)\URMLPR | SpeedField | "FASTEST", "STRONGEST" | "FASTEST" | 5.4 | "FASTEST" – a speed trap sends speed of the fastest object to the Intellect software "STRONGEST" – a speed trap sends speed of the biggest object to the Intellect software Important! If values other than above are specified for the key, the Intellect software does not recieve speed data from speed traps. |
x32: (x32)\URMLPR | Compress | 0, 1 | 1 | 5.2 | The parameter is intended for disabling compression when transferring video from the video subsystem (the Camera object) to the LPR channel, if the video subsystem and the LPR channel are on the same local computer. This allows reducing the load on the Server processor. 0 – the video is transmitted to the local LPR channel without compression. 1 – the video is transmitted to the LPR channel after compression. |
x32: (x32)\URMLPR | RemoteLpr.NearestTime | Full path to local or network folder | 0 | 5.3 | The key specifies the time difference (in milliseconds) between the moments of receiving the frame and license plate recognition event, sufficient to allow these events to be linked. The key is to be in use if data about recognized license plates are not displayed on the On-line monitor in Auto Intellect, although there are recognition events in the Debug window. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | LprDB.Path | 0, 1 | C:\ProgramData\AxxonSoft\LprDB | 5.5 | Specifies the local or network folder for storing the recognized LP images and vehicle images if the LprDB.Use key value 1 (see below) is specified. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | LprDB.Use | 0, 1 | 1 | 5.5 | Specifies the way of storing images. 0 – metadata and images are stored only in the database. 1 – metadata is stored in the database, and images are stored in the local or network folder. Full path to the folder is specified by the LprDB.Path key (see above). Note. Recognized LP numbers information is stored in the database regardless of the LprDB.Use key. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | LprDB.FreeMB | >0 | 5000 | 5.5 | Specifies the amount of free storage space in a directory. When its limit is exceeded, the overwriting process starts, rewriting the oldest images with the most recent ones. The key is used if the LprDB.Use key value is 1 (see above). |
| х32: (х32)\URMLPR x64: (х64)\URMLPR | Alarms.LimitedByBestResult | 0, 1 | 0 | 5.5 | The parameter allows ignoring all the tracks after the best frame detected by SDK. 0 - tracks after the best frame detected by SDK are not ignored. 1 - all the tracks after the best frame detected by SDK are ignored. |
| х32: (х32)\URMLPR x64: (х64)\URMLPR | Alarms.CrossWalkOne | 0, 1 | 0 | 5.5 | The parameter activates alarm even if only one plate is recognized at the crosswalk (regardless of if the vehicle was moving or not). 0 - the system tries to detect crossing the crosswalk and only after that activates alarm. 1 - activates alarm even if only one plate is recognized at the crosswalk. |
| х32: (х32)\URMLPR x64:(х64)\URMLPR | SaveRecognitionResult | 0, 1 | 0 | 5.5 | Activates saving the recognition results to the hard drive. It is used for the Traffic violations detection module debugging. 0 - the recognition results are saved to the Auto Intellect DB. 1 - the recognition results are saved to the hard drive. |
| х32: (х32)\URMLPR x64: (х64)\URMLPR | AutoUragan.SDKVersion | 3.5, 3.7 | 3.5 | 5.5 and later | The key sets the SDK version which is being used in the Auto-Uragan software module. |
POS-Intellect | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\POS | Capture | 0, 1 | 1 | 4.7.3 and later | Defines whether to store log-files or not. |
x32: (x32)\POS | Dos2Win | 0, 1 | 1 | 4.7.3 and later | Detects encoding: |
x32: (x32)\POS | GlobalTextDelay | - | 0 | 4.7.3 and later | Sets the shift of Text data from video to TextSearch. |
x32: (x32)\POS | Nohotkey | 0, 1 | 1 | 4.7.3 and later | Allows disabling hot keys used for POSVIEWER and TITLEVIEWER. If Nohotkey = 1, then when clicking |
x32: (x32)\POS | PosLogMaxsize | >0 | 10 | 5.1 | The key sets maximum size (in MBs) of the POS terminal’s log. Note. POS terminal logging is enabled using the Capture key – see above. |
| x32: (x32)\POS x64: (x64)\POS | SetFlowControlNone | 0, 1 | 1 | 5.4 and later | COM port control. Set to 0 if POS terminal fails to operate while connecting to POS-Intellect. |
| х32:(х32)\POS x64:(х64)\POS | UseLocalTimestamp | 0, 1 | 0 | 5.4 and later | The key enables the received local timestamp conversion to UTC when creating a record in the corresponding POS-Intellect database. 0 - received local timestamp will be recorded to the corresponding database without any changes. 1 - received local timestamp will be converted to UTC when creating a record in the corresponding database. |
| х32:(х32)\POS x64:(х64)\POS | UseLastCashierInfo | 0, 1 | 0 | 5.4 and later | In case the D-store POS-terminals are used, the key enables saving the info about the last cashier whose data was received by the POS-terminal. Until there is no data, the following default values are used: cashier_name = "Jane B."; cashier_number = "1147911"; 0 - the info about the last cashier whose data was received by the POS-terminal, is not saved. 1 - the info about the last cashier whose data was received by the POS-terminal, is saved. |
| х32:(х32)\POS x64:(х64)\POS | NewReceipt.Use | 0, 1 | 0 | 5.4 and later | In case the D-store POS-terminals are used, the key enables initiating the receipt creation by any data input. In addition to that, the text line specified in the NewReceipt.Word key (see below) is added to the receipt text. 0 - the receipt creation is initiated by the word specified to trigger the receipt creation. 1 - the receipt creation is initiated by any data input, and the text line specified in the NewReceipt.Word key (see below) is added to the receipt text. Note. This key works only if the UseLastCashierInfo key (see above) is enabled. |
| х32:(х32)\POS x64:(х64)\POS | NewReceipt.Word | String value | NEW RECEIPT | 5.4 and later | The key enables specifying the text line which will be added to the receipt text if the NewReceipt.Use key (see above) is enabled. |
| х32:(х32)\POS x64:(х64)\POS | PrintTime | 0, 1 | 0 | 5.4 and later | The key activates displaying in the Monitor the time (UTC) when each caption appeared. 0 - the captions timestamps (UTC) are not displayed in the Monitor. 1 - the captions timestamps (UTC) are displayed in the Monitor. |
Detectors pack | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\DetectorExt\HeatZoneDetector x64: (x64)\DetectorExt\HeatZoneDetector | ReportFrequency | >0 | 900 | 4.9.0 and later | Sets the data collection frequency (sec) for heat zone detection tool. |
x32: (x32)\DetectorExt\HeatZoneDetector x64: (x64)\DetectorExt\HeatZoneDetector | DebugReportFrequency | >0 | 10 | 4.9.0 and later | Sets the data update frequency (sec) from heat zone detection tool in the Debug window in seconds. |
| х32: (X32)\Video\ x64: (x64)\Video\ | report_frequency | >=0 | 3000 | 2.6 and later | Sets the time period in milliseconds, during which the repeated triggering of the Sweethearting detection module is ignored. |
...
Overview
Content Tools