Page History

...

General information

Two versions of Axis T8310 control panel are integrated with Intellect: Rev01 and Rev02. The setup and operation procedure for these versions in Intellect is similar.

It is not recommended to connect control panels of both versions to Intellect at the same time to avoid incorrect operation of the system.

The control panel can be added to Intellect as a control device –  see Configuring the Control device object. In this case, events on pressing keys, changing the position of the joystick, etc. in the Event Viewer are received from the Control Device object.

Configuring Axis T8310 control panel in

...

Intellect

Configure Axis T8310 control panel in INTELLECT™ Intellect as follows:

1. Create the Telemetry controller object.
2. Configure the Telemetry controller object as follows:
   
   

   1. Set the Axis interface protocol.

   2. Other settings of this object are ignored by system because the control panel of Axis T8310 telemetry is connected to the Server using USB interface.

3. Create the Control panel system object under the Telemetry controller object.

4. Configure the Control panel object as described in Configuring Control panel section.

5. If Rev01 panel is in use, restart Intellect

Axis T8310 control panel is now configured in INTELLECT™Intellect.

Features of Axis T8310 control panel operation in

...

Intellect

Pressing the key on Axis T8310 control panel there is Key is pressed or Key is released message in INTELLECT™ Intellect.

AXIS T8310 control panel is a modular system that consists of three devices: 

1. AXIS T8311 joystick. This device has functionality of an ordinary joystick and it is configured in the standard way (see Configuring the joystick for telemetry control section). The device also has 6 hot keys.

   Info
   title Note.
   By default the image zooms out if z axis is rotated right (in clockwise order) and zooms in if z axis is rotated left (counterclockwise) while the telemetry is controlled in the Monitor using Axis 8311 joystick.

   
   

2. AXIS T8312 keyboard has10 hot keys and 12 programmed keys.
3. AXIS T8313 Jog Dial has 6 hot keys and a navigation wheel.

The panel model varies depending on the connected devices.

If complete AXIS T8310 control panel is used, then modules are connected to each other via AXIS T8312 keyboard (USB hub).

...

Pressing the key on the keyboard of AXIS T8310 control panel in INTELLECT™ Intellect there is Key is pressed or Key is released message. 

...

...