Page History

...

1. Go to the mobile application settings by clicking the  button.
   
2. In the Network settings group, set the parameters as follows:

   1. In the

      URL

      RTSP server field (1),

      specify the IP address of the Intellect/Axxon Next server.

      move the switch to the position Image Added to use the RTSP server mode. If the switch is in the position Image Added, then the RTMP mode will be used.

   2. In the RTMP push url

      in the Token

      field (2),

      leave

       specify the

      default value TOKEN .

      Info
      title Note
      The application is authorized on the server with the default parameters: User=1, Password=1.

   In the Direct pushing settings group, set the parameters as follows:

   Set the Force direct pushing checkbox (3) to disable interaction with the livestream service and use the default ports.

   Info
   title Note
   This can be useful in case of problems with video streaming.

3. In the URL field (4), specify the value of the "push video to url" string from the file on the livestream.out.log server.

1. value of the "push video to url" string from the file on the livestream.out.log server to use the RTMP mode. In the RTSP server mode, you can skip this parameter.

2. In the RTSP server port field (3) set the port number of the RTSP server. In the RTMP mode, you can skip this parameter.

3. The RTSP server url field (4) field contains the URL of the video stream in the RTSP mode. To copy it, tap on the field once.

4. In the Video settings In the Video params group, set the parameters as follows:
   1. In the resolution Resolution back field (5) select the resolution of the main camera.
   2. In the resolution Resolution front field (6) select the resolution of the front camera.
   3. In the fps FPS field (7) set the frame rate.
   4. In the bitrate Bitrate field (8) set the bitrate of the video.

...