Page History

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

2

Select cameras group

License plates recognition drop-down list

Select value from the list

Main video camera for license plate recognition

List of available Camera objects

Camera 1

Depending on the number of available Camera objects

Synchronous recording drop-down list

Select value from the list

Additional video camera operating together with the main camera

List of available Camera objects

None

Depending on the number of available Camera objects

Auto recording checkbox

Set the checkbox

Enabling the automatic recording on the LP number recognition

Boolean

No

Yes – automatic recording enabled,

No – automatic recording disabled

Auto recording, s field

Enter the value in the text field

Setting the auto recording duration (in seconds)

Seconds

10

0 - 1000

For normal mode:

Yes –  if the camera is armed, the LPR channel scans all video images until the basic motion detection of the PSIM software is in the Alarm mode; If the camera is not armed, the LPR doesn't work, but manual start using scripts is available (see item 6 in the Scripts used in the Auto - PSIM software package section). Recognition will process frames until the stop command will be done.

No – the LPR channel scans video images permanently.

For Parking mode:

Yes –if the camera is armed, the LPR channel scans all video images, until the plate will be recognized, after it recognition stops even if the Alarm mode is still in process and procedure repeats when the new trigger of alarm is activated; if the camera is not armed, the LPR doesn't work, but manual start using scripts is available (see item 6 in the Scripts used in the Auto - PSIM software package section). Recognition will process frames until the plate will be recognized and then will stop before new manual start.

No – the LPR channel scans video images permanently

3

Settings button 

Not available for: 

• Remote recognition
• ARH-Carriages
• ARH-Containers
• CARMEN-Auto
• IntLab

Click the button

Access to frame sign settings

-

-

-

The vehicle's movement direction will be treated as Entry to the territory

Yes - The LPR channel considers the vehicle's movement direction as Entry to the territory.

No - The LPR channel does not consider the vehicle's movement direction as Entry to the territory.

Note. This setting is taken into account in the PSIM Web Report System when working with Auto reports (see PSIM Web Report System. User Guide).

Speed camera settings drop-down list

Select the value from the list

Selecting the speed camera to work together with LPR channel

List of available Speed traps objects

Not specified

Depending on the number of available Speed traps objects

Synchronization time field

Enter the value in the text field

The time it takes the car to move from the point of speed detection by the Speed traps server module to the viewing zone of the camera

Milliseconds

Not specified

0 - 20000

Filter events from speed camera checkbox

Set the checkbox

Enables saving the first speed detected only

Boolean

No

Yes – only the first detected speed value is used, others are ignored until the delay expires or the number is recognized

No – all speed values are used

Get speed from video checkbox

Available for:

• AUTO-Uragan
• CARMEN-Auto
  
• VIT
• RoadAR

Yes – vehicle speed is estimated by video, the results are displayed over video image as captions.

No – vehicle speed is not estimated by video.