Page History

...

If the Sensor-Relay card is installed on FS-8 video capture card, then the Relay objects are to be created under the Video Capture Device object with 07 value of the PCI-channel.

Image Modified

Relay objects can be relocated in the object tree. To change the parent  Video Capture Device object of the Relay objects, change the value of the Video Capture Device object on the settings panel of the Relay object. The value of this parameter is to correspond to the number of the Video Capture Device object (in the object tree) under which the Relay object is to be located. If the value of the Video Capture Device parameter is changed on the settings panel of the Relay object, then the object is moved to the branch of child objects of the corresponding Video Capture Device object.

...

The next figure shows an example of locating the Relay objects in the object tree when two FS-6 (or FS-16) video capture cards with 4 relays connected to the first 4/4 (or 16/4) Sensor-Relay card and 2 relays connected to the second one are used. 

Image Modified

Configuring the Relay objects one is to specify the channel numbers of sensor connection to the Sensor-Relay card according to the numbers of the DO pins on the card.

...

The figure below shows an example of the channel numeration configuration of 4 relays connected to one 4/4 Sensor-Relay card installed on FS-6 (or FS-16) video capture card (4 ADCs for 4 Video Capture Device objects).

Image Modified

Channels of the second 16/4 Sensor-Relay card are numbered 1-4 according to input connectors.

Example of the channel numeration configuration of relays connected on the second (next) 16/4 Sensor-Relay card installed on FS-6 (or FS-16) video capture card (4 ADCs for 4 Video Capture Device objects):

Image Modified