Page History

...

Debug mode is a special operation mode when the Debug Window is open, and is designed for analyzing the progress of Intellect software operation and for prompt debugging in case errors occur. Log files are created in this mode − they are stored on the disk for a specific time period. 

...

By default, debug mode is disabled. To enable debug mode, do the following:

1. Shut down Intellect software Intellect.
2. Start the Tweaki.exe utility (see the Starting and shutting-down the Tweaki.exe utility).
3. Select the Intellect node in the tree on the left side of the utility dialog box.
4. Change the parameter Debug Mode from None to Debug 1, Debug 2, Debug 3 or Debug 4 (see The Settings panel of the Windows section).
5. Click the OK button.
6. Start Intellect system.
   The Debug window item will appear in the Intellect main control menu.
   
7. Select Debug window in the main control menu to open the Debug window. The selected item will be marked with a tick.
   

...

One can set log keeping parameters both on the Intellect setting panel in the Tweaki.exe utility (see The Settings panel of the Intellect section) and using some registry keys:

...