Versions Compared

Old Version 2

changes.mady.by.user Evgeniya Kononova

Saved on

compared with

New Version 3

changes.mady.by.user Darya Andryieuskaya

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The settings panel of the SIP-device object is shown in the pictures below.

Image Modified

Table describes the parameters of the SIP-device system object.

...

The Video / Audio tab (only for SIP server terminal type)

Image Modified

Table describes the parameters of the Video / Audio tab.

№

Parameter

Method for setting the parameter value

Description

Presented as

Default value

Range of values

1The Video switchSet the switch to the required positionSets the video camera used for callsSupported options of camera usageOff

Off — the video is not used during the call.

SIP camera — a SIP-device camera connected via the SIP protocol is used.

Other — any other camera from the Axxon PSIM hardware tree selected from the Camera drop-down list is used.

2The Camera drop-down listIs selected in the listSets any video camera used for calls

Name of the Camera objects

registered in the system.

-Depends on the number of the Camers Camera objects in the system.
3The Audio switchSet the switch to the required positionSets the microphone used for callsSupported options of audio usageOff

Off — the audio is not used during the call.

On — the microphone of the SIP-device is used.

4The Microphone fieldAutomaticallyDisplays the name of the Microphone object corresponding to the SIP device---

The Relay tab (only for SIP server terminal type)

Image Modified

Table describes the parameters of the Relay tab.

...

Table describes the parameters of the Device connection settings window.

№

Parameter

Method for setting the parameter value

Description

Presented as

Default value

Range of values

1The Login fieldEnter the value in the fieldSets the user name to connect to the (BasIP) SIP deviceLatin, Cyrillic letters and service characters-A line representing a sequence of any symbols (letters, numbers, service symbols)
2The Password field Enter the value in the fieldSets the password to connect to the (BasIP) SIP deviceLatin, Cyrillic letters and service characters-A line representing a sequence of any symbols (letters, numbers, service symbols)
3The IP address field Enter the value in the fieldSets the (BasIP) SIP device IP addressIP address-1.0.0.0 - 255.255.255.255