Go to documentation repository
Page History
...
| Code Block |
|---|
OnEvent("OLXA_LINE ", "_id_","_event_") |
Event | Description |
"ACCU_START" | Sound activated recording ON |
"ACCU_STOP" | Sound activated recording OFF |
"ARM" | Record ON |
"DISARM" | Record OFF |
"INCOMING_NUMBER" | Incoming telephone number |
"OUTGOING_NUMBER" | Outgoing telephone number |
"REC" | Start of record |
"REC_STOP" | End of record |
"RESET" | Microphone connecting |
Operator format to describe actions with the microphone is:
...
List of commands and parameters for the OLXA_LINE object is presented in the following table:
Command – command description | Parameters | Description |
"ARM" – turn on the microphone to record |
- | - | |
"DISARM" – turn off the record from microphone |
- | - | |
"SETUP" – setting of microphone parameters |
type<> | Type of line |
accu_start <> | Operating threshold of sound detection |
accu_stop<> | Holding time of detection triggering |
amp<> | Gain |
aru<> | Automatic gain control |
aru_dyn<> | Level of AGC |
aru_time<> | AGC attack time |
chan<> | Number of microphone sound channel |
compression<> | Type of compression |
flags<> | Flags |
name<> | Object name |
rec<> | Start of record |
Properties of the OLXA_LINE object are given in the table.
Properties of the OLXA_LINE object | Description of properties |
ID<> | Object ID |
PARENT_ID<> | Parent object ID |
Check function of the OLXA_LINE object state:
...
The OLXA_LINE object can be in the following states:
State of the OLXA_LINE object | State description |
"BLUE" | Microphone disarmed |
"GREEN" | No signal from microphone |
"YELLOW" | Microphone armed |
"RED" | Start of record |
...
Examples of using events and reactions of the Microphone object:
...
Overview
Content Tools