Go to documentation repository
Page History
...
The GRELE object sends events presented in the table. Procedure is started when the corresponding event appears.
...
| Code Block |
|---|
OnEvent("GRELE", "_id_","_event_") |
Event | Description |
"OFF" | Relay Off |
"ON" | Relay On |
"SIGNAL_LOST" | Connection lost. |
Operator format to describe actions with the relay is:
| Code Block |
|---|
DoReact("GRELE","_id_","_command_"); |
List of commands and parameters for the GRELE object is presented in the following table:
Command – command description | Parameters | Description |
"ON" |
– enable relay |
- | - | |
"OFF" |
– disable relay |
- | - | |
"SETUP" – settings for relay |
chan <> | Output number (0 – 15) |
flags<> | Flags |
name<> | Object name |
Properties of the GRELE object are shown in the table.
Properties of the GRELE object | Description of properties |
ID<> | Object ID |
PARENT_ID<> | Parent object ID |
REGION_ID<> | Region ID |
Check function of the GRELE object state:
...
The GRELE object can be in the following states:
State of the GRELE object | State description |
"ON" | Relay ON |
"OFF" | Relay OFF |
"DETACHED_ON" | Connection lost |
"DETACHED_OFF" | Connection lost |
Examples of using events and reactions of the Relay object:
...
Overview
Content Tools