Page History

AUTO Intellect

Registry section

Available values

Default

Product version

Parameter in effect

x32: (x32)\LPRVIEWER
x64: (x64)\LPRVIEWER

protocollimit

<1000

-

4.7.5 and later

Sets number of lines shown in the protocol (this parameter is for testing only).

x32: (x32)\radar
x64: (x64)\radar

EmulateRefreshSpeed

1 - 2147483647

100

4.7.5 and later

Radar emulator. Sets time period (ms) for refreshing data about speed in the radar emulation mode. 0 value blocks data refreshing.

x32: (x32)\radar
x64: (x64)\radar

WriteSpeedOnTitles

0, 1

0

4.7.5 and later

Defines whether to write speed values on titles.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

DisableUrmOutput

0, 1

0

4.7.5 and later

Disables results output.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

GlobalUrmDebug

0, 1

0

4.7.5 and later

Enables displaying CZoneInfo objects in dbgview. 

x32: (x32)\URMLPR
x64: (x64)\URMLPR

OneSpeedDetect

0, 1

0

4.7.5 and later

Enables filtering the radar speed values.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

ReadSpeedFromTitles

0, 1

0

4.7.5 and later

Defines whether to read speed from titles or not.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

TestWidth

-

0

4.7.5 and later

 Image width change (internal use only).

x32: (x32)\URMLPR
x64: (x64)\URMLPR

TestHeight

-

0

4.7.5 and later

 Image height change (internal use only).

x32: (x32)\URMLPR
x64: (x64)\URMLPR

Time

-

-

4.7.5 and later

Saves time of the last viewed archive fragment in the test mode.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

UrmDebug

0, 1

0

4.7.5 and later

Enables recording of  tiff files to UrmDebug folder.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

UrmSendProcessEvents

0, 1

0

4.7.5 and later

Sends beginning (VEHICLES_BEGIN) and ending (VEHICLES_END) parameters of license plate recognition to the core.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

UseTry

0, 1

0

4.7.5 and later

Enables the seh module.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

WriteUraganErrorBuf

0, 1

0

4.7.5 and later

If failure occurs, the uragan.buf file is created (only of UseTry=1). 

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

CountryName

Text

RUS

4.7.5 and later

Sets the test country name.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

Enabled

0, 1

0

4.7.5 and later

Enables/disables test.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

ExecuteSecond

> = 0

3

4.7.5 and later

Sets time of test execution.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

Number

Text

M038EH150

4.7.5 and later

Sets the test number.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

PlateHeightPercent

> 0

15

4.7.5 and later

Sets the test license plate height.

x32: (x32)\URMLPR\UnitTest
x64: (x64)\URMLPR\UnitTest

PlateWidthPercent

> 0

25

Sets the test license plate width.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

ParkingMode

0, 1

-

5.0

Enabling the parking mode for the CARMEN-Auto recognizer:

1 – parking mode is enabled. Recognition starts at ULPR|START reaction. As soon as one license plate is recognized, the recognition stops.

0 – parking mode is disabled. Recognition continues till getting the ULPR|STOP reaction. 

Important! For correct operation of the key make sure that the Enable on motion detection trigger checkbox is set on the settings panel of the LPR channel object corresponding to the CARMEN-parking recognition module (see Setting the joint operation of the LPR channel and the motion detector of the Intellect platform).

Note. The ULPR|START and ULPR|STOP reactions are created using the scripts. Operator command, sensor triggering, motion detection tool triggering, etc. can cause the reaction.

Enabling the parking mode for the CARMEN-Auto recognizer:

1 – parking mode is enabled. Recognition starts at ULPR|START reaction. As soon as one license plate is recognized, the recognition stops.

0 – parking mode is disabled. Recognition continues till getting the ULPR|STOP reaction. 

Note. If you set the 1 value on the settings panel of the LPR channel object, the Enable on motion detection trigge checkbox will be automatically set without the possibility of removing it until this key value is set to 0 (see Setting the joint operation of the LPR channel and the motion detector of the Intellect platform).

Note. The ULPR|START and ULPR|STOP reactions are created using the scripts. Operator command, sensor triggering, motion detection tool triggering, etc. can cause the reaction.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

When value = 1, the key allows saving frames transmitted from Intellect to the CARMEN Parking / CARMEN-Auto module.

• For CARMEN Parking the frames are saved to the following folders:
  < Intellect installation folder>\Modules64\UrmLpr\CPD_RawResults\idDetector\ - frames with data for recognition.
  <Intellect installation folder >\Modules64\UrmLpr\CPD_RawResults\idDetector\NotFound – frames with no data for recognition.If value = 0, then frames are not saved.

• For CARMEN Auto the results are stored to the <Intellect>\Modules64\UrmLpr\CarmenResults\idDetector\ folder. The results are represented by pairs of files: ‘<recognition time in UTC format>.bmp’ file (with a frame to be recognized) and xml file with settings of the recognizer and recognition results.

• If the module is restarted, the Apply button is clicked or 5000 files are saved, then the specified folder and the data in it are automatically deleted and the folder is recreated. 

When value = 1, frames are not saved.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

x32: (x32)\URMLPR
x64: (x64)\URMLPR

x32: (x32)\URMLPR
x64: (x64)\URMLPR

Sets time (in milliseconds) corresponding to the delay with which events about green/red traffic lights are received.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

x32: (x32)\URMLPR
x64: (x64)\URMLPR

The key enables the multi-stream mode emulation in IntLab.

0 – license plates recognition is performed when the ray, specified on the settings panel of the IntLab-Carriages module object, is open or closed (see Setting up the IntLab-Carriages module).

x32: (x32)\URMLPR
x64: (x64)\URMLPR

The key includes the multichannel mode emulation for the IntLabmodule.

0 –  LP number recognition is carried out using macro specified on the IntLab module object settings panel (see Setting up the IntLab module).

1 –  when it is necessary to start the LP number recognition, the information on the time of occurrence is taken from subtitles added to a video.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

The key sets an algorithm of frame preparation before sending it to the Carmen license plate recognition module:

0 – frames are sent to the Carmen license plate recognition module without pre-processing.

1 – rectangular areas that may contain a license plate are searched in the frame. Only those rectangular areas that may contain a license plate are then forwarded to the Carmen license plate recognition module.

2 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it tries to find another plate number, and time for recognition increases as a result.

3 – if any rectangular area that may contain a plate number is detected on the frame, the frame in whole is forwarded to the Carmen license plate recognition module. If the Carmen license plate recognition module detects a license plate, it does not try to find another license plate.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

"FASTEST" – a speed trap sends speed of the fastest object to the Intellect software

"STRONGEST" – a speed trap sends speed of the biggest object to the Intellect software

Important! If values other than above are specified for the key, the Intellect software does not recieve speed data from speed traps.

x32: (x32)\URMLPR
x64: (x64)\URMLPR

x32: (x32)\URMLPR
x64: (x64)\URMLPR

The key specifies the time difference (in milliseconds) between the moments of receiving the frame and license plate recognition event, sufficient to allow these events to be linked. The key is to be in use if data about recognized license plates are not displayed on the On-line monitor in Auto Intellect, although there are recognition events in the Debug window.

RemoteLpr.x.NearestTime

X is the object identifier of the LP recognition channel in the Intellect software.

>=0

For the specified object of the LPR channel with the assigned remote recognition module, the key sets the time difference in milliseconds between the moments of receiving the frame and event on the LP recognition enough to bind these events. You should use the key if the data on the recognized LPs are not displayed in the Active Monitor of the Auto Intellect although they are found in the Debug window and Event protocol.

Specifies the way of storing images.

0 – metadata and images are stored only in the database.

1 – metadata is stored in the database, and images are stored in the local or network folder. Full path to the folder is specified by the LprDB.Path key (see above).

Note. Recognized LP numbers information is stored in the database regardless of the LprDB.Use key.

Specifies the amount of free storage space in a directory. When its limit is exceeded, the overwriting process starts, rewriting the oldest images with the most recent ones. The key is used if the LprDB.Use key value is 1 (see above).

The parameter allows ignoring all the tracks after the best frame detected by SDK.

0 - tracks after the best frame detected by SDK are not ignored.

1 - all the tracks after the best frame detected by SDK are ignored.

The parameter activates alarm even if only one plate is recognized at the crosswalk (regardless of if the vehicle was moving or not).

0 - the system tries to detect crossing the crosswalk and only after that activates alarm.

1 - activates alarm even if only one plate is recognized at the crosswalk.

Activates saving the recognition results to the hard drive. It is used for the Traffic violations detection module debugging.

0 - the recognition results are saved to the Auto Intellect DB.

1 - the recognition results are saved to the hard drive.

The key sets the SDK version which is being used in the Auto-Uragan software module.

Note. It is applied to all activated Auto-URAGAN software modules in Auto-Intellect.

The key activates the LP numbers recognition simultaneously on several CPUs using parallel computing, which increases the performance of the Auto-URAGAN software module.

Note. It is applied to all activated Auto-URAGAN software modules in Auto-Intellect.

The key sets the number of CPUs that will be used for parallel computing by the Auto-URAGAN software module, if the parallel computing is activated.

Note. It is applied to all activated Auto-URAGAN software modules in Auto-Intellect.

The key enables the tracking of the recognized number disappearance and sets the time in milliseconds, after which the lost number event will be generated if this number has disappeared from the camera field of view.

0 - tracking of the recognized number disappearance is disabled.

>1 - after the specified time has passed, if the recognized number disappeared from the camera field of view, a lost number event will be generated.

The key enables saving the filtered numbers to the database.

0 - filtered numbers are saved to the database.

1 - filtered numbers are not saved to the database.

The key activates the display of two-line numbers in the Event Log in two lines.

0 - two-line numbers are displayed in two lines.

1 - two-line numbers are displayed in one line.

The key sets the time in minutes, after which the violation detected by the main recognizer is ignored if the second recognizer, which is paired with the main one, also detected a violation.

The key activates the automatic restart by the timeout for the Auto-URAGAN recognition module if no recognition results are received from it.

The key disables the receiving of photos from the main cameras of the recognizers.

The key sets the number of frames that are stored in the buffer for the CARMEN-Auto module. It is applicable if there is skipping of numbers, but it may cause a delay in the numbers recognition.

The key sets the number of unprocessed frames that are stored in the buffer for all license plate recognition modules. It is applicable if there is skipping of numbers, but it may cause a delay in the numbers recognition.

The key activates the saving of the number recognition result in the * .jpg format for the VIT module. As a result of the module operation, the AutoRecongitionResult folder will be created at the path: <Intellect installation directory>\Modules64\UrmLpr\, into which the files with the following names will be saved: recognizer ID in Intellect - recognized number - violation <if any>.jpg.

Note. This setting is required for debugging.

The key sets the mode of determining the vehicle direction of movement of the vehicle.

0 - the direction is determined by the SDK.
1 - the direction is calculated by the position of the upper part of the number. If at the start of tracking the upper part of the number is lower than the upper part of the number at the end of tracking, then the direction is defined as “From the camera”, otherwise “To the camera”.
2 - the direction is calculated by the area of the LP number. If at the start of tracking the area of the number is larger than at the end of tracking, then the direction is defined as “From the camera”, otherwise “To the camera”.

The key sets the waiting time in seconds required for the number to appear if the vehicle is detected several times after stopping.

The key activates the mechanism for the IntLab module that displays the frame where the number is the most visible, however, it causes a time delay in the displaying of the results.

The key activates the discarding of all tracks after the best frame which was defined by the recognition module.

The key activates an alarm if there is at least one number identification at the pedestrian crossing. Vehicle traffic is not taken into account.

Note. By default, the system tries to determine the traffic on a pedestrian crossing.

The key enables the entry of an Arabic LP number in the search field.

It is necessary to activate this key if the Persian calendar is used on the LPR channel.

Internal setting. Disables saving of frames from a synchronous video camera to the LprDB.Path folder and the [lprex].[dbo].[FramesSecondary] database.

0 - saving of all images from a synchronous video camera is disabled.

1 - saving of all images from a synchronous video camera is enabled.

Ulpr.NumberDetectedRestartTimeout

This key should be created if the LP recognition on one or more LPR channels stop from time to time. The key sets the time in minutes; if during this time no LPs were recognized, then the reaction is sent to the Intellect software core:

ULPR|N|NUMBER_DETECTED_TIMEOUT

where N is the identifier of the LPR channel object. Having received this reaction, the core re-sends the settings to the recognition module, thus emulating the Apply button click on the settings panel of the LPR channel object.

AutoInfo.Use

The key automatically enables the display of the vehicle type in the Online Monitor window if the Vehicle Type Recognition Module (UrlServer) is activated.

0 - the detected vehicle type is not displayed in the Online Monitor window.

1 - the detected vehicle type is displayed in the Online Monitor window.

Note. The key value changes automatically.

The key specifies the folder in which the Intlab x32 SDK is installed.

The key specifies the folder in which the Intlab x64 SDK is installed.

AutoInfo.Url

http-address

http://127.0.0.1:8091/GetAutoInfo

The key sets the http-address for the interaction with the Vehicle Type Recognition Module (UrlServer).

The key sets the number of frames that are stored in the buffer for the Vehicle Type Recognition Module (UrlServer). It is defined as the approximate time spent by the vehicle in the frame multiplied by the fps of video.

If 0 - then the MMR (VIT) works.

If < 0 - then the Vehicle Type Recognition Module (UrlServer) works with the 350 value.

If > 0 - then the Vehicle Type Recognition Module (UrlServer) works with the specified value.

The key specifies the folder into which the frames processed by the Vehicle Type Recognition Module (UrlServer) will be saved (cropped frames containing only the vehicle). These frames are necessary for training a neural network (see Saving the frames processed by the Vehicle Type Recognition module).

VehiclePlateSearch.RightToLeft

When using the CARMEN-Auto software module and the Arabic license plate numbers recognizer, the key sets the sequence of Latin numbers and letters in the second line of the recognized LP number displayed in the Online monitor.

0 - Latin numbers are displayed first, then letters.

1 - Latin letters are displayed first, then numbers.

The key works only if saving the frames processed by the Vehicle Type Recognition module (UrlServer) is enabled. 

The key value indicates the coefficient by which the number plate width will be multiplied. The photo will be cropped from the left relative to the number plate at a distance equal to the product.

The key works only if saving the frames processed by the Vehicle Type Recognition module (UrlServer) is enabled. 

The key value indicates the coefficient by which the number plate width will be multiplied. The photo will be cropped from the right of the number plate at a distance equal to the product.

The key works only if saving the frames processed by the Vehicle Type Recognition module (UrlServer) is enabled. 

The key value indicates the coefficient by which the number plate height will be multiplied. The photo will be cropped from the top relative to the number plate at a distance equal to the product.

The key works only if saving the frames processed by the Vehicle Type Recognition module (UrlServer) is enabled. 

The key value indicates the coefficient by which the number plate height will be multiplied. The photo will be cropped from the bottom relative to the number plate at a distance equal to the product.

The key allows you to send a message about the number, even if the frame dimensions, which are necessary for the correct calculation of the number plate coordinates, are not initialized. This solves the problem of incorrect linking of numbers when sending the number plate coordinates.

0 - a message about the number is not sent if the frame dimensions are not initialized.

1 - a message about the number is sent even if the frame dimensions are not initialized.

Sets the timeout in seconds for connecting to the selected Auto Intellect servers when the Event search in the Recognizers DBs window is opened. If the specified time is exceeded, connection attempts are stopped and a list of servers to which it was not possible to connect is displayed.

LprDB.Log

Enables recording of LP recognition logs to the Logs table of the lprex DB. The records in the table are cleared according to the specified records retention period in the database. Used for debugging.

The key is used if the standard port 10001 used by the LPR channel for communication with the Vehicle Tracer module client is occupied by a third-party application that cannot be disabled. The key allows you to set a new port number for communication between the server and client parts.

The key is used to control the number of events to be deleted from the Auto Intellect internal database.

0 - all records that exceed the specified amount of archive storage will be deleted from the database.

1 - a maximum of 1000 records will be deleted from the database with a 3-minute timeout.

The key displays the data file about the triggered engine in the Online monitor window.

0 - the data file is not displayed.

1 - the data file is displayed.

The key specifies the time in seconds, during which the repeated license plate recognitions on all channels within one physical server are ignored.

The key enables the mode of evenly distributing the load on the CPU cores.

0—the mode isn't enabled

1—the mode is enabled

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

PeakWorkingSetSizeQuota

>=0

100

from 8.0

The maximum memory size in megabytes used by the process videosrv.exe on ATM-Intellect Pro. If the parameter is set to 0, then the check for the used memory is not performed.

Once a day, the ATM-Intellect Prochecks the size of the memory it uses. The check is performed at the time specified by the TimeOfCheckWorkingSetSize key (see below).

After exceeding the specified value, the videosrv.exe module is rebooted.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeOfCheckWorkingSetSize

>=0

3

from 8.0

Time to check memory usage in hours. Default value is 3 (3:00 AM). See also the PeakWorkingSetSizeQuota key description above.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

StoreVideoFiles

>0

3

from 5.0

Time period for storage of not completely downloaded files on ATM-Intellect Pro. After the storage period is exceeded, the not completely downloaded files are deleted.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

run_intellect

0.1

1

from 5.0

The key sets the ATM-Intellect Pro actions in case if the Intellect software is shut down.

0 – do not start the Intellect software

1 – start the Intellect software

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

socket_connect_tout

>=0

0

from 5.0

The key defines TCP/IP connection mode with ATM-Intellect Workstation.

0 – blocking mode. ATM-Intellect Pro connects to ATM-Intellect Workstation without specifying connection timeout.

>0 – non-blocking mode. ATM-Intellect Pro connects to ATM-Intellect Workstation with a connection timeout set by the socket_connect_tout > 0 parameter in seconds.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

write_buffer_enable

0.1

1

from 7.0

Data buffering while recording on disc when receiving video data on ATM-Intellect Workstation. ATM-Intellect Pro transfers video data to ATM-Intellect Workstation in packages of 800 to 4096 bytes (4096 by default). When buffering is enabled, a 264 Kb block of memory is allocated to the ATM-Intellect Workstation for receiving video data, and data is saved to the disk when this memory block is full, not every time a packet is received from ATM-Intellect Pro.

0 – buffering is enabled.

1 – buffering is disabled.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

stop_data_by_trx

0.1

1

from 5.0

The key determines the actions of ATM-Intellect Pro in case if, during the transfer of video data to ATM-Intellect ARM, a financial transaction has begun on the ATM.

0 – video data transfer is not stopped.

1 – video data transfer is suspended until financial transaction if completed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key specifies the port on the ATM-Intellect Workstation used for connecting the clients.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

financial_trx_tout

>0

60

from 7.0

Timeout for waiting for the financial transaction to complete in minutes. If after the start of the financial transaction during the time-out, there is no message from the ATM about its end, it will be considered to be completed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

TimeAlarmFromAgent

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key enables automated video clip loading.

0 – automated video clip loading is disabled.

1 – automated video clip loading is enabled.

Note. The key is created at ATM-Intellect Workstation and/or Additional workstation

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key sets folder to share data with third party systems which is necessary for automated video clip loading.

Note. The key is created at ATM-Intellect Workstation and/or Additional workstation

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key changes the Log Panel interface color theme.

0 - dark interface theme.

1 - light interface theme.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key specifies the path to the catalog of frames and video clips which were exported from the Monitoring interface during the live and archive video playback from a certain camera.

See Playing back live video and archive from a specific camera.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key removes the restriction on adding the same cameras for tracking in different Surveillance Objects.

0 - the restriction is enabled.

1 - the restriction is removed.

x32: HKLM\SOFTWARE\BitSoft\MonitorSSTV\Loader

x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\MonitorSSTV\Loader

The key accelerates the speed of data loading from files to the MonitorSSTV database by activating the group operator of data loading if the database is installed locally.

0 - do not use the BULK INSERT operator (if the SQL Server is remote)
1 - use the BULK INSERT operator (if the SQL Server is local)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key sets the time in minutes, after which, if the data in the MonitorSSTV database is outdated, the corresponding indication on the ATM-Intellect Workstation will appear.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key disables the ability to accept alarms and force error closing.

0 - the ability to confirm alarms and force error closing is enabled.

1 - the ability to confirm alarms and force error closing is disabled.

If the key is set to 1, then:

• the area for comments and buttons for confirming the alarm are not displayed in the Reaction to alarm window; when you set the Confirm checkbox, nothing happens;
• when you click on the Force error closing button on the toolbar, the window with confirmation of force error closing does not open.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

The key sets low priority of the StreamViewer process when it starts.

0 − The StreamViewer process starts with normal (medium) priority.

1 − The StreamViewer process starts with low priority.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

If the parameter isn’t created or equals 0, the video data isn’t stored in the ATM Intellect database (MonitorSSTV).

If the parameter > 0, its value equals the number of days the video data should be stored in the ATM Intellect database. When this period is exceeded, the video data is deleted from the database

Restricting the Operator’s access to the camera's functional menu and its options

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the camera's menu.

0 - The menu is displayed.

1 - The menu is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Arm menu option.

0 - The Arm menu option is displayed.

1 - The Arm menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Start recording menu option.

0 - The Start recording menu option is displayed.

1 - The Start recording menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Camera menu option.

0 - The Camera menu option is displayed.

1 - The Camera menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Show titles menu option.

0 - The Show titles menu option is displayed.

1 - The Show titles menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Processing menu option.

0 - The Processing menu option is displayed.

1 - The Processing menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Export menu option.

0 - The Export menu option is displayed.

1 - The Export menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Deinterlacing menu option.

0 - The Deinterlacing menu option is displayed.

1 - The Deinterlacing menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Zoom-in menu option.

0 - The Zoom-in menu option is displayed.

1 - The Zoom-in menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Contrast menu option.

0 - The Contrast menu option is displayed.

1 - The Contrast menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Detector mask menu option.

0 - The Detector mask menu option is displayed.

1 - The Detector mask menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Sharpen menu option.

0 - The Sharpen menu option is displayed.

1 - The Sharpen menu option is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Archive button.

0 - The Archive button is displayed.

1 - The Archive button is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the time.

0 - The time is displayed.

1 - The time is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the camera name.

0 - The camera name is displayed.

1 - The camera name is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key hides the Menu button.

0 - The Menu button is displayed.

1 - The Menu button is hidden.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key disables the control over the CamMonitor component using the hotkeys available for Video Monitor (see Video surveillance monitor).

0 - The control over the CamMonitor component using the hotkeys is enabled.

1 - The control over the CamMonitor component using the hotkeys is disabled.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key enables the Telemetry control using the CamMonitor component (see Telemetry control).  

0 - The Telemetry control using the CamMonitor component is disabled

1 - The Telemetry control using the CamMonitor component is enabled.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key activates the Delete menu item which is used to remove the recordings from the archive. It is used only in Intellect version 4.11 and higher (see Deleting video recordings from the archive).

0 - The Delete item is hidden.

1 - The Delete item is displayed.

x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor

x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor

The key activates the Protect menu item which is used to protect the archive recordings from rewriting. It is used only in Intellect version 4.11 and higher (see Protection of separate record and disable of protection).

0 - The Protect item is hidden.

1 - The Protect item is displayed.

x32: (x32-ATM/Monitoring)

x64: (x64-ATM/Monitoring)

DISK:\Export\

, where DISK is the drive on which the operating system is installed

Sets the path to the export directory on ATM-Intellect Workstation