Page History

№

Parameter name

Parameter setting method

Description

Data type

Default value

Value range

2

Select cameras group

License plates recognition

Select value from the list

Main video camera for license plate recognition

List of available Camera objects

Camera 1

Depending on the number of available Camera objects

Synchronous recording

Select value from the list

Additional video camera operating together with the main camera

List of available Camera objects

None

Depending on the number of available Camera objects

Auto recording 

Set the checkbox

Enabling the automatic recording on the LP number recognition

Boolean

No

Yes—automatic recording enabled,

No—automatic recording disabled

Auto recording, s 

Enter the value in the text field

Setting the auto recording duration (in seconds)

Seconds

10

0-86400

For normal mode:

Yes—if the camera is armed, the LPR channel scans all video images until the basic motion detection of the Axxon PSIM software is in the Alarm mode. If the camera is not armed, the LPR doesn't work, but manual start using scripts is available (see item 6 in the Scripts used in the Auto PSIM software package section). Recognition will process frames until the stop command will be done

No—the LPR channel scans video images permanently

For Parking mode:

Yes—if the camera is armed, the LPR channel scans all video images, until the plate will be recognized, after it recognition stops even if the Alarm mode is still in process and procedure repeats when the new trigger of alarm is activated; if the camera is not armed, the LPR doesn't work, but manual start using scripts is available (see item 6 in the Scripts used in the Auto PSIM software package section). Recognition will process frames until the plate will be recognized and then will stop before new manual start

No—the LPR channel scans video images permanently

Yes—the lesser frame is stretched, the bigger one is cut off

No—the lesser frame is stretched, the bigger one is handled without changes

3

Settings button 

Not available for: 

• Remote recognition,
• ARH-Railway,
• CARMEN-Auto,
• IntLab

Click the button

Access to frame sign settings

-

-

-

The vehicle movement direction will be treated as Entry to the territory

Yes—the LPR channel considers the vehicle's movement direction as Entry to the territory

No—the LPR channel does not consider the vehicle's movement direction as Entry to the territory

Note. This setting is taken into account in the Web Report System PSIM when working with Auto reports (see WEB Report System PSIM. User Guide)

Area search threshold 

Available for:

• AUTO-Uragan,
• LPR IntelliVision

Enter the value in the text field

Detecting zone sensitivity

Number

60

0-100

Max. width

Available for:

• AUTO-Uragan,
• IntLab,
• LPR IntelliVision,
• Taiwan,
• VIT

Enter the value in the text field

Maximum available width of license plate

Percentage of frame width

21

0-100

Max. height

Available for:

• AUTO-Uragan,IntLab,
• LPR IntelliVision

Enter the value in the text field

Maximum available height of license plate

Percentage of frame height

9

0-100

Button X

Available for:

• AUTO-Uragan
• LPR IntelliVision

Click the button

Access to the interactive interface of setting the area width and height

-

-

-

Min. width 

Available for:

• AUTO-Uragan
• LPR IntelliVision
• Taiwan
• VIT

Enter the value in the text field

Minimum available width of license plate

Percentage of frame width

-

0-100

Min. height

Available for:

• AUTO-Uragan
• LPR IntelliVision

Enter the value in the text field

Minimum available height of license plate

Percentage of frame width

-

0-100

Button X

Available for:

• AUTO-Uragan
• LPR IntelliVision

Click the button

Access to the interactive interface of setting the area width and height

-

-

-

Cut image with vehicle 

Available for:

• AUTO-Uragan
• Bioiris
• CARMEN-Auto
• LPR IntelliVision
• Remote recognition
• RoadAR
• Taiwan
• VIT

Set the checkbox

Set up the detection settings to the image with a car

Boolean

No

Yes—frame with a vehicle is cut

No—frame with a vehicle is not cut

Allow recognition by request

Available for:

• CARMEN-Auto
• RoadAR
• VIT
• Taiwan
• ARH-Railway

Yes—on-demand image recognition is enabled

No—on-demand image recognition is disabled

Enabling the option of the LP number search area boundaries setting

Yes—the option of the LP number search area boundaries setting is enabled

No—the option of the LP number search area boundaries setting is disabled

by LP position—the direction is determined by the position of the upper part of the LP number. If the upper part of the LP number at the start of tracking is lower than the upper part of the LP number at the end of tracking, then the direction is defined as From the camera, otherwise — To the camera.

by LP area—the direction is determined by the license plate area. If the LP area at the start of tracking is larger than the LP area at the end of tracking, then the direction is defined as From the camera, otherwise — To the camera.

by SDK—the direction is determined by the SDK. Currently, the following LP recognition modules support this mode: RoadAR, VIT, AUTO-Uragan, LPR IntelliVision

Direction

Available for:

• AUTO-Uragan,
• Bioiris,
• IntLab,
• Remote recognition,
• RoadAR,
• Taiwan,
• VIT,
• RIDR IntelliVision,
• CIDR IntelliVision

Select value from the list

Setting the traffic direction to detect the LP numbers

List 

any

Any—the direction of movement from the video camera or towards the video camera

From the camera—the direction of movement from the video camera

To the camera—the direction of movement towards the video camera

For the IntLab, RIDR IntelliVision and CIDR IntelliVision modules, the direction of carriage movement in the camera view is selected from left to right or from right to left

Undefined

Available for:

• ARENA,
• AUTO-Uragan,
• Bioiris,
• CARMEN-Auto,IntLab,
• Remote recognition,
• RoadAR,
• Taiwan,
• VIT,
• RIDR IntelliVision,
• CIDR IntelliVision

Yes—if it is impossible to determine the direction of vehicle movement, the direction is displayed as Undefined

No—if it is impossible to determine the direction of vehicle movement, the direction is not determined

Record violation

Only used when direction is selected in the Direction list (To the camera/From the camera)

Set the checkbox

Enabling event generating in case of vehicle entering an oncoming lane

Boolean

Yes

Yes—in case if the direction of vehicle moving is not coincide with the specified in the Direction list, the Entered the oncoming lane alarm event will be created

No—the Entered the oncoming lane alarm event is not created