Page History

...

1. From the Type of driver drop-down list (1), select the controller connection interface: RS-232 or Ethernet.
   Image Modified
2. If the controller is connected via a COM port:
   1. From the Port drop-down list (2), select the number of the port to which the controller is connected.
   2. From the Baudrate drop-down list (3), select the baud ratebaudrate.
   3. Click the Apply button (4).
3. If the controller is connected via Ethernet:
   Image Modified
   1. In the IP field (1), specify the controller's IP address.
   2. In the Port field (2), specify the controller port number.
   3. Click the Apply button (3).

...