Go to documentation repository
Page History
...
| Info | ||
|---|---|---|
| ||
You cannot edit stream parameters if the camera was added in the Keep current settings mode (i.e. with the parameters that were set in the web interface, see Adding and removing IP devices). To be able to configure these parameters, you need to set the Send settings to device checkbox (see The Camera object). |
By default, all added camera video streams are enabled. If necessary, you can disable the second, third and other additional video streams by selecting No in the Enable field. The main video stream of the camera is activated by default and cannot be disabled.
The Use for GreenStream parameter is designed to display video streams in Auto (GreenStream)/High quality/Low quality modes (see Selecting video stream quality in a Surveillance window (GreenStream)).
...
| Note | ||
|---|---|---|
| ||
|
Changing the camera video streams
In Axxon One, each stream is assigned a corresponding video camera stream profile, for example:
| Stream indication in Axxon One | Camera stream profile (profile name is determined by the driver) |
| Main | 0. video_streaming_h264_QSXGA |
| Second | 1. video_streaming_h264_VGA |
| Third | 2. video_streaming_mjpeg |
If necessary, you can change the profile for the stream, in this case:
...
You can also change the video stream settings by sending an HTTP request to the device (see the manufacturer's official documentation) using macros (see Executing a web query, Starting an external program on Serversthe Server, Starting an external program on Clients).
Overview
Content Tools