Go to documentation repository
Page History
...
№ | Parameter | Method for setting the parameter value | Parameter description | Symbols used | Default value | Value range |
| 1 | VLC player compatibility mode | Set the checkbox | Enables sending the current time to VLC Media Player instead of the frame time | Boolean type | Clear | Set—the current time is sent to VLC Media Player Clear—the frame time is sent to VLC Media Player |
| 2 | ECHD compatibility mode | Set the checkbox | The mode is required for the correct operation of navigation through the archive, if the RTSP Server is used to broadcast video data to the ECHD system | Boolean type | Set | Set—the ECHD compatibility mode is enabled Clear—the ECHD compatibility mode is disabled |
| 3 | Use captions track | Set the checkbox | Enables sending the video captions along with video image via the RTSP Server | Boolean type | Clear | Set—if there are captions on the video image, they are sent to the the receiving app Clear—the video captions are not sent via the RTSP Server |
| 4 | Hot connection mode | Set the checkbox | Eliminates a delay of several seconds when requesting a video via RTSP | Boolean type | Clear | Set—when requesting video via RTSP, the delay will be minimum (~1 sec) Clear—when requesting video via RTSP, the delay will be ~1-5 sec |
| 53 | Source IP interface | Select the value from the list | Sets the name of the network interface that should must be used to transmit the RTSP Server | Names of the network interfaces | ANY | The list of the available network interfaces of the computer. ANY—the default network interface is used |
| The NAT settings group | ||||||
| 46 | IP address | Enter the value into the field | Sets the IP address of the router that performs the NAT transmission | IP address | - | IP addresses range for the local network |
| 57 | Port | Enter the value into the field | Sets the port of the router that performs the NAT transmission | Sequence of numbers | 0 | 0-65535 |
...
Overview
Content Tools