Requirements for the operation of the Pose Detection and its sub-tools are given in the table:
The Pose detection tools operation has the following requirements:
...
...
- We also don't recommend using a resolution higher than
|
...
- 1920×1080, since higher resolution
|
...
- doesn't increase the detection quality, but significantly increases the consumption of resources. The optimal resolution for solving typical tasks is 1280x720
|
...
- The frame rate per second in the video stream from the camera is at least 8
|
...
| Note |
|---|
| - Correct operation of the Pose Detection tools isn't guaranteed when using fisheye cameras and other cameras with strong image distortion.
- The camera tilt angle from top to bottom on a person must not exceed 30°.
|
|
...
- Otherwise, the detection tool won't operate correctly.
The following diagrams show the examples of:- The acceptable tilt angle:
 Image Added - The unacceptable tilt angle:
 Image Added
|
|
| Lighting | |
...
- is at least 50 lux per square meter. In conditions of insufficient or excessive lighting (night or light-striking), stable operation of the analytics
|
...
...
...
- No abrupt changes in lighting
|
...
...
...
| - Moving objects are visually separable from each other
|
...
- The background is mostly static and
|
...
...
- Moving objects are minimally obscured by
|
...
- static objects in the scene (columns, trees,
|
...
...
...
- doesn't have reflective surfaces and sharp shadows from moving objects. If present, they
|
...
...
...
- doesn't result in image offsets greater than 1% of the frame size
|
...
| Note |
|---|
|
- Correct operation of the Pose detection tools is not guaranteed when using fish-eye cameras and other cameras with strong image distortion.
- The camera tilt angle from top to bottom on a person should not exceed 30°. Otherwise the detection tool will not operate correctly.
The following diagrams show the examples of:- The acceptable tilt angle:
Image Removed - The unacceptable tilt angle:
Image Removed
|
| Object images | - The detected object must be clearly distinguishable by the human eye
- The detected object must be completely within the frame
- The image isn't noisy and not distorted by the artifacts of compression algorithm
- The duration of the object visibility is at least two frames
- The minimum value of pixel density per meter is observed:
| Image resolution | Object type | Minimum pixel density per meter (ratio of the object width in pixels to the object width in meters) | Minimum object size in pixels, width x height |
|---|
| For Pose Detection sub-tools | | 1920x1080 | Human | 170 | ~102x309 | | 1280x720 | Human | 128 | ~77x233 | | 640x360 | Human | 80 | ~48x145 | | For common sub-tools | | 1920x1080 | Human | 100 | ~45x187 | | 1280x720 | Human | 68 | ~31x134 | | 640x360 | Human | 35 | ~15x65 |
|
...
Hardware requirements for neural analytics operation
...
