Go to documentation repository
Page History
...
| Tip |
|---|
Video stream and scene requirements for the Equipment detection (PPE) and its sub-tools Image requirements for the Equipment detection (PPE) and its sub-tools |
Configuring the detection tool
To configure the Equipment detection (PPE), do the following:
...
| Note | ||
|---|---|---|
| ||
To ensure the correct reception of the E-mail notifications (see E-mail notification) after the detection tool event is generated, you must configure a separate macro with an E-mail message for each item of equipment. |
Examples of configuring the Equipment detection (PPE) for solving typical tasks
Typical tasks for detecting equipment and personal protective equipment:
...
The recommended settings for solving typical tasks are as follows:
| Parameters | Equipment detection in gateway conditions | Equipment detection in production conditions |
|---|---|---|
| Basic | ||
| Number of frames processed per second | 1 | 7 |
| Min person height | 0.01 | 0.09 |
| Min person width | 0.01 | 0.03 |
| Advanced | ||
| Number of measurements in a row to trigger detection | 3 | 7 |
| Mask | No | No |
| One event per PPE element | Yes | Yes |
Overview
Content Tools