Page History

In the case of multi-user processing, only one operator may accept an alarm for processing. Other operators may switch to alarm Alarm Management mode with limited functions functionality for the purpose of playing back the alarm. This can be done in one of two ways:

1. Click the  button (see the section Video surveillance in alarm management mode).
2. Switch Go to the Alarms tab and select the alarm from the alarms list.
   

In Alarm Management mode with limited functionsfunctionality, the Alarm Management buttons are not displayed. Instead, the name of the operator who is currently processing the alarm event is displayed. The other Other functions of the alarm handling tile remain unchanged.

After processing of the alarm on another client, on the given client the status assigned to the alarm is displayed in place of the name of the operator.

If the operator has taken an alarm event into processing, this task will not be available for another operator.

After processing an event on another Client, the assigned status of the alarm event is displayed on this Client instead of the operator name.

If an operator accepts If a user has accepted an alarm for processing and leaves then exits the Alarm Management mode (going switches to Live Video mode, Archive or Archive Search mode, to the viewing tile for of another camera, etc.), after an amount of time and the operator absence time is equal to the operator's idle Idle time after leavingparameter value, other users will also have the opportunity then other operators are able to accept the alarm event for processing.

If more than one alarm appears for one camera, any operator may access all alarms not yet accepted for processing.