Versions Compared

Old Version 11

changes.mady.by.user Yulia Morozova

Saved on

compared with

New Version 12

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

Features of the Multicast mode:

  1. To get a multicast video in Axxon PSIM (see Configuring multimedia receipt using RTSP protocol) set the multicast value to the RTSP parameter in the HKEY_LOCAL_MACHINE \SOFTWARE\AxxonSoft\PSIM\Video\TransportProtocols registry section (for 64-bit system the path is HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\AxxonSoft\PSIM\Video\TransportProtocols) on computer where the Camera object is created. For detailed information on this parameter, see Changing the transport protocol used by IP-device.
  2. RTSP Server can broadcast simultaneously in Multicast and Unicast modes. Receiving both such streams on the Axxon PSIM client is impossible due to RTSP key which determines the connection mode (see above). However, the VLC player allows receiving streams in both modes in the same time.
  3. The ports that are assigned to each camera in this mode will not be displayed in the Windows OS Resource Monitor and other similar operating system resource monitors.

Using the Multicast mode allows you to reduce the load on the Server by reducing the amount of transmitted data. To distribute the transmitted signal among different RTSP ports, do the following:

...

Address

Example

Description

rtsp://ServerIP address[:Port]/CameraNo[?stream_id=StreamNo]

 

rtsp://127.0.0.1/1

Viewing default stream from Camera 1 if default port is in use

rtsp://127.0.0.1:555/1

Viewing default stream from Camera 1 when broadcasting in Multicast mode if default port 555 is in use.

Note. Connection to the RTSP stream is performed via the broadcasting adapter IP address, not by the destination IP which is specified in the settings panel of the RTSP Server and is used internally

rtsp://127.0.0.1:555/7?stream_id=7.2Viewing second stream from Camera 7
rtsp://Login:Password@ServerIP address[:Port]/CameraNortsp://login:pass@127.0.0.1:554/1Viewing video signal from Camera 1 if users and permissions are configured in Axxon PSIM (see Rights administration)
rtsp://login:pass@127.0.0.1:555/1Viewing video signal from Camera 1 in Multicast mode if users and permissions are configured in Axxon PSIM
rtsp://Server IP address[:Port]/CameraNo?mic_id=Microphone IDrtsp://127.0.0.1:555/15?mic_id=1Viewing video from Camera 15 with audio
rtsp:// Server IP address[:Port]/?mic_id= Microphone IDrtsp://127.0.0.1:555/?mic_id=1Getting audio only from microphone 1 with no video from any camera

rtsp:// ServerIP address[:Port]/archive?id= CameraNo.&time_begin=yyyy.mm.dd-hh:mm:ss&time_end= yyyy.mm.dd-hh:mm:ss

rtsp://127.0.0.1:554/archive?id=1&time_begin=2011.11.11-11:11:11&time_end=2011.11.11-11:12:00

Viewing video archive from Camera 1 for specified time period

rtsp:// Server IP address[:Port]/archive?id=CameraNo&mic_id= Microphone ID &time_begin=yyyy.mm.dd-hh:mm:ss&time_end= yyyy.mm.dd-hh:mm:ssrtsp://127.0.0.1:554/archive?id=1&mic_id=1&time_begin=2011.11.11-11:11:11&time_end=2011.11.11-11:12:00Viewing video archive from Camera 1 with audio from microphone 1 for specified time period
rtsp://ServerIP address[:Port]/archive?id=CameraNo.&time_begin=yyyymmddThhmmssZ&time_end=yyyymmddThhmmssZrtsp://127.0.0.1:555/archive?id=1&time_begin=20160331T080000Z&time_end=20160331T080800ZViewing video archive from Camera 1 for specified time period
rtsp://ServerIP address[:Port]/archive?id=CameraNo.&time_begin=yyyymmddThhmmssZrtsp://127.0.0.1:555/archive?id=4&time_begin=20160316T065000ZViewing video archive from Camera 4 from specific start time till the archive end (as the value of time_end is not specified in the address)
rtsp://ServerIP address[:Port]/archive?id=CameraNortsp://127.0.0.1:555/archive?id=4Viewing video archive from Camera 4 from the beginning till the end
rtsp://ServerIP address[:Port]/archive?id=CameraNo.&long_term_archive=BackupArchiveNortsp://127.0.0.1:559/archive?id=1&long_term_archive=2Viewing Camera 1 video archive from Backup archive 2
rtsp://Server IP address[:Port]/archive?id=CameraNo.&gate=VideogateNortsp://127.0.0.1:559/archive?id=1&gate=3Viewing Camera 1 video archive from Videogate 3
rtsp://Server IP address[:Port]/archive?id=CameraNo.&time_begin=yyyymmddThhmmssZ&time_end=yyyymmddThhmmssZ&z=PlayBackSpeedrtsp://127.0.0.1:554/archive?id=2&time_begin=20171120T102000Z&time_end=20171120T104000Z&z=-1Speed-down playing back video archive of Camera 2 for the specified period of time.
Value of the z parameter greater than 0 (valid values are 2, 4, 6 ... 16) enables speed-up archive playback.
If the parameter z is less than 0 (valid values are -1, -2, ... -16), then the archive is played back in the reverse order with the corresponding acceleration. Only key frames are played back at reverse playing
rtsp://Server IP address[:Port]/archive?id=CameraNo.&time_begin=yyyymmddThhmmssZ&time_end=yyyymmddThhmmssZ&long_term_archive=BackupArchNortsp://127.0.0.1:554/archive?id=2&time_begin=20201117T110200Z&time_end=20201117T114900Z&long_term_archive=1

Retrieve camera 2 records from backup archive 1, starting from 1411:02:00 UTC+4 on 11/17/2020 and ending at 1411:49:00 UTC+4 on the same day.

time_begin and time_end in the request are UTC+0 times.time. If the archive is in a different time zone, you need to specify the time taking into account the time difference. For example, if the archive is located in UTC+4 and you need a period from 15:02:00 to 15:49:00, the above example is suitable.

On The specified Backup archive must be selected for the corresponding camera on the settings panel of the the RTSP Server object, you must select the specified Backup archive for the corresponding camera.

The VLC player compatibility mode must be enabled to view in VLC Media Player

...