Page History

...

1. Go to the Hardware tab in the System settings dialog box window (1).Image Removed
2. In the object tree, select the Camera object Computer object corresponding to the configured Server (2).
3. Click the Camera discovery tool button on the setting panel of the selected object (3).
   Image Added
   

   As a result, the IP Ip Wizard window is displayedopens. Found IP devices are displayed on at the top of the window.

   Note
   title Attention!
   Video capture cards can also be displayed in the list. However, it is strongly NOT recommended to add them to configuration from the IP Wizard tool. Configure video capture cards manually as described in Configuring video capture cards in Axxon PSIM™ softwarePSIM. By default, the list also displays found obsolete devices that are no longer supported in the installed version of the Drivers Pack. If such devices should must not be displayed, create a registry key UseObsoleteAttribute=1 (see Registry keys reference guide).

   Info
   title Note
   The IP Ip Wizard window can also be displayed by selecting the Camera discovery tool item in the context menu of the Computer object. Image Modified

   
   Click In the Ip Wizard window, click column name to sort devices by value in the column. Data are sorted alphabetically, including IP addresses. For example, when IP addresses are sorted in ascending order, 10.0.12.98 is lower than 10.0.12.252 in the list.

4. If the required device is not in the list, try clicking click the Search button (1). Wait for the list is updatedto update, as the search can take several seconds. If you click the Search button again during the search, the current search is stopped and a new search is started.
   

   Info
   title Note
   If necessary, you can increase the wait time for a response from the device by setting the additional time in milliseconds in the parameter of the AdditionalSearchTime registry key (see Registry keys reference guide. For more information on working with the registry, see Working with Windows OS registry).

5. Check up the vendor brand (2), model (3) and firmware (4) for found IP device. Make changes if necessary If necessary, make changes by opening the drop-down list and selecting the required value.
6. From the drop-down list (5), select which settings which should must be installed set on the IP - device while its when adding it to the device hardware tree: leave installed installed device settings or apply video server settings.
7. Check up the TCP/IP port (8). Specify the required value in the field.
8. Specify the login (6) and password (7) to connect IP device. Login and password are specified in the documentation for the connected network device.
9. If necessary, add additional information to the beginning of the names of created objects (for example, the path where the object is located). Enter this information in the Added string field (12). You can use Latin and Cyrillic letters and service characters except for the > and < symbols; characters limit is 60 including the length of the object name, which is set by default. The setting will be applied to the objects which you can select in the next step.

10. Select the objects that are to be created under you want to create on the basis of the IP device.

    Info
    title Note
    The number of objects that can be created under you can create on the basis of the IP device is displayed automatically in the the Hardware available for adding table (10).

    1. Open the drop-down list of supported IP device by clicking the + button.
       
       Correspondence of object names in IP Wizard to the branches of object tree is given in the table.:

       Name of object in IP Wizard	Branch of object tree in Axxon PSIM
       Video channelChannel	The Video Capture Device object → The Camera object
       Audio input	The Audio card object → The Microphone object
       Contact	The Video Capture Device object → The Sensor object
       Executive device	The Video Capture Device object → The Relay object
       Telemetry line	The Telemetry controller object → The PTZ device object
       Audio output	The Playback card object → The Loudspeaker Speaker object

    2. Set the checkboxes for next to the objects that are you want to be createdcreate.

       Info
       title Note
       To create/delete all objects, set the checkbox checked/unchecked /clear the checkboxes next to the vendor brand of IP device.

11. Click the Apply button for one device each selected device (9) or for all selected devices (11) if several devices are selected.
    The selected objects are created automatically in the Hardware object tree on the Hardware tab.  

12. Repeat steps 4-8 for each IP device that is you want to be created create in the system.

    Info
    title Note
    To delete the IP - device from theIP Ip Wizardwindow, right-click the corresponding line in the table and select the Delete camera <IP address> from the list item. To delete the an IP - device object or objects created under on the basis of it from the hardware tree by means of the IP Wizard, set clear the checkboxes unchecked for the corresponding objects and click the Apply button.

13. If the IP device has not been isn't found, then you can add it manually.

    1. From the
Vendor
14. 1. Brand, Model, and Firmware drop-down lists, select the brand, model and firmware installed on the IP device
accordingly
15. 1. (13-15).
    2. In the IP address and Port fields (16, 17), specify the IP address of device and the number of TCP/IP port.
    3. Click the Add button (18).
       As a result,
The
16. 1. the IP device with the specified parameters is displayed
on
17. 1. at the top of the window.
11.
18. To complete the IP device creation, repeat steps 6-8.
12.
19. Click the Exit button to close the
IP
20. Ip Wizard window (19).

IP device creation is completedcomplete.