Page History

...

To configure an embedded storage, do the following:

1. Go to the Devices tab.
Select the
2. Select the 
3. Embedded storage object
in
4. from the child objects of the camera.

Image Removed
5. 
   

   Parameter	Value	Description
   Send settings to device	Image Added	By default, the checkbox is set. This option allows you to send the settings from Axxon One to the web interface of the camera so that the camera adapts its internal parameters to these settings. To disable the option, clear the checkbox
   	Image Added
   Enable	Yes	By default, the embedded storage is disabled. To enable it, select Yes
   	No
   Name	Embedded storage	Enter the object name
   Cache depth	0	If necessary,

6. In the Enable parameter, select the Yes value to enable an embedded storage.
7. If necessary, in the Name parameter, enter the name of the object.
If necessary, in the Cache depth parameter,

8. enter the depth of record caching in days. The setting enables background caching of information about recording intervals to RAM. The value must be in the range [0, 365]

.
In the

10. Cache update period

parameter, enter

11. 0

    Enter the cache update period in seconds. The value must be in the range [0, 86400]

.
13. Click the Apply
Image Removed
14. Image Added button.

Configuration of an embedded storage is complete. If an embedded storage is enabled in the system, the data from it are available for viewing (see Selecting an archive) and replication to the system archive (see see Configuring data replication).