Page History

...

1. Go to the Devices tab.
2. Select the Microphone object in the object tree. If necessary, you can change the values of the parameters that are listed in the table:
   

   Parameter	Value	Description
   Other
   Enable	Yes	By default, the microphone is disabled. To enable it, select Yes
   	No
   Name	Microphone	If necessary, enter the microphone name
   Audio codec	RAW	Select the codec used to compress the audio stream
   Volume	High level	Select the volume level of the audio device
   	Low level
   Camera
   Camera

   1.Camera

   {Short name.Name}

   From the drop-down list,

   select the

   select the camera with which you want to bind the microphone. As a result, the microphone becomes a child of the selected camera (see Camera)

3. Click the Apply  button.

To check the operation of the microphone, do the following:

...