Page History

...

To configure an embedded storage, do the following:

1. Go to the Devices tab.
2. Select the Embedded storage object from the child objects of the camera.
   

   Parameter	Value	Description

Send settings to device

Image Removed

By default, the checkbox is set. This option allows you to send the settings from Axxon One to the web interface of the camera so that the camera adapts its internal parameters to these settings. To disable the option, clear the checkbox

Image Removed

3. Enable

   Yes

   By default, the embedded storage is disabled. To enable it,

select 

4. select Yes
   	No
   Name	Embedded storage	Enter the object name
   Cache depth	0	If necessary, enter the depth of record caching in days. The setting enables background caching of information about recording intervals to RAM. The value must be in the range [0, 365]
   Cache update period	0	Enter the cache update period in seconds. The value must be in the range [0, 86400]

5. Click the Apply Image Modified button.

Configuration of an embedded storage is complete. If an embedded storage is enabled in the system, the data from it are available for viewing (see Selecting an archive) and replication to the system archive (see Configuring data replication).