Versions Compared

Old Version 4

changes.mady.by.user Bahdan Tsiulkou

Saved on

compared with

New Version 6

changes.mady.by.user Alena Kniazeva

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Note
titleAttention!

To work with the FaceID integration module, you must install and configure the Enrollment System software , in which several users with administrator permissions are created. Otherwise, you cannot work with the manufacturer's software and Axxon One + ACFA.

To configure the FaceID integration module, do the following:

  1. Go to the settings panel of the FaceID object settings panel.

  2. In the Address field, specify the address of the computer on which the Enrollment System software is running.
  3. In the Login field, specify the name of the user registered in the Enrollment System software. 
  4. In the Port field, specify the number of the port to connect to the Enrollment System software.
  5. In the Password field, specify the password of the user registered in the Enrollment System software.
  6. From the Events receiver drop-down list, select the On value value so that the events about access events and region change events by the user are displayed in the Event Viewer. The on the event panel. The Off value is selected by default, at which the events about access events and region change events by the user aren't displayed in on the Event Viewerevent panel.
  7. In the Monitoring interval, [5..10] s field, specify the interval in seconds for polling the status of devices in the range [5, 10].
  8. Click the Apply button to save the changes.
  9. Click the button and select Download configuration from the from the drop-down list to download the configuration automatically and build the hardware device tree.
  10. Click the Apply button.

Configuration of the FaceID integration module is complete. As a result, a hardware device tree is built.