Page History

Module can exchange and process data between ACFA PSIM and BACnet devices

Generic protocol (BACnet)

Module can exchange data, receive events, and send commands via Modbus TCP or Modbus RTU protocols

Generic protocol (Modbus)

Module can exchange data, receive events, and send commands via Modbus TCP or Modbus RTU protocols

Generic protocol (Modbus)

Module can transfer data in real time and integrate systems with different interfaces, providing centralized monitoring and process control

Generic protocol (OPC)

Module is used to connect to OPC server and can exchange data and receive events according to UA standard

Axxon PSIM AxACFA Sensor License, per each variable (ACFASensor)

Generic protocol (OPC)

Module can exchange data and receive events via SNMP protocol v.1, v.2, and v.3 

Generic protocol (SNMP)

Suprema BioMini
Suprema Realscan G10
Proxy-USB-MA
ST-CE321LR-WT
PW-Desktop BLE
Honeywell Voyager 1400g (supported through the Text reader module)
All PC/SC compatible smart card readers (for example: ACS ACR1252U)
BioSmart FS80*
Hikvision DS-K1F100-D8E*
Hikvision DS-K1F820-F*
Dahua DHI-ASM202*

* This control reader modules are installed automatically together with the corresponding ACS integration modules

Axxon PSIM—control reader for visitor management system

An unlimited number of control readers is also included in the Axxon PSIM Access Manager/Visitor Management System license

MOXA cards (list of all cards that can be connected by the Moxa MX-AOPC UA Server or via SNMP is presented here).

Note. Licensing of OPC and SNMP connection differs. For OPC, the connection with the OPC Server is license-protected, while each Moxa input and output is licensed for SNMP

Connection with OPC Wrapper:

• control relay depending on type of card;
• receive the current state of connected sensors

Connection with SNMP Wrapper:

• receive the current state of connected sensors

• monitoring, control

• receive the current state of object;
• reset the object in its default state;
• arm/include the object in the controlled area;
• disarm/exclude the object from the controlled area;
• set the object in test mode;
• set the object in active state from quiet;
• set the object in quiet state from active

• receive events about passes;
• door tampering;
• exit by button

• monitoring of the status of a zone or an element;
• sending control commands to a group or an element;
• internal acoustic off command;
• external acoustic off command;
• summary alarm reset command

Monitoring:

• status of a point or a zone;
• status of an output;
• status of a line;
• status of a panel;
• status of an acoustic signaling device;
• status of an UE.

Control:

• connect/disconnect a point or a zone;
• connect/disconnect an output;
• send a command to a panel

• open/close of fire dumper;
• set the angle of fire dumper;
• receive the current state of connected devices;
• receive states of fire dumper (open, close, damage);
• control program that control all fire dumpers in case of damage;
• show temperatures inside the ventilation tunnels;
• control smoke exhaust fan

Monitoring of the following events:

• Humidity is out-of-bounds;
• Humidity is within borders;
• Cabinet open;
• Cabinet close;
• Temp is out-of-bounds;

• Temp is within bounds;

• Power loss;

• Power connected

• receive status and events from controller elements, for example, temperature sensors, relay status (on, off)

• device status poll

• door status monitoring;
• door control

KZ fire fighting controller (vendor: OOO «Vega-GAZ»)