Page History

To configure SIP-operators are configured as follows, do the following:

1. Create a the SIP-operator object based on the basis of the SIP-terminal object.
   

2. In the Number field (1) enter , enter the identification number for calls.

3. If

   it is necessary

   you want to bind

   a

   the SIP-operator to the Axxon PSIM user rights,

   set the

   do the following:

   1. Set the Bind operator to user rights checkbox (2)

   and select the corresponding Axxon PSIM user from the User

   1. .

   2. From the User drop-down list (3)

   . It is used when the User rights are selected by default on the operator's SIP panel

   1. , select the corresponding Axxon PSIM user. When you select the default operator on the SIP panel, the User rights are used (see Operator settings of the SIP-panel interface object).

4. From the Device priority drop-down list (4), select the priority of a call from this operator in the incoming calls window of the SIP panel. The lower the number, the higher the priority, and hence, the higher the call is displayed in the list. If you leave the field is left blank, the priority is considered to be minimal. Calls from operators with the same priority will be are sorted by the time of the a call.

5. In the Address books table (5), select the required address books, the access to the numbers of which should must be available for this SIP-operator (see see Configuring address book of SIP-terminal).

   Info
   title Note
   To add new lines to the table, use the "Down" key on your the keyboard. To delete a line, use the Ctrl+Del key combination.

   1. To add all address books, click the All button (6).

   2. To add several address books, click the Range button (7). This will open the As a result, the Add address books window opens.
      Image Modified

      1. Select the required address books from the left list (1) and use the buttons (2) to move them to the right list (3).

      2. Click the Apply changes and close button (4).

6. Click the Apply button (8).

The Configuring SIP-operators on the SIP server of the SIP server are configured Axxon PSIM's is complete.