Versions Compared

Old Version 8

changes.mady.by.user Alena Kniazeva

Saved on

compared with

New Version Current

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

By default, the video stream is recorded to the archive with the same frame rate as the video capture card digitizes it. Thus, to reduce the archive sizein Axxon PSIM, you can configure the frame rate value of this parameter.

Info
titleNote
The reduction change of the video recording stream frame rate doesn't affect the display of the video signal that is displayed on the server surveillance monitor and its transmission transmitted to the Remote Workstations remote workstations by the network.

To change the recording frame rate of the video stream, do the following:

  1. Go to the Hardware tab in the System settings window.
  2. Select the Camera object in the object tree that corresponds to the required adjusted camera.
  3. Go to the Select the Basic settings tab on the settings panel of the Camera object.
    Image Modified

  4. Specify Set the recording frame rate value in of the Recording frame rate field. The _fps parameter. This value mustn't exceed the digitization frame rate value.

    The value set for the Recording frame rate _fps parameter allows calculating the time interval (msec) in which a frame must be captured for archive recording. You can calculate according to the formula:
    Time interval = 1000 / Value specified in the Recording frame rate _fps field

    Info
    titleNote
    When setting you set the value of the Recording frame rate_fps parameter, you must note the video digitizing rate by the video capture card and the frame rate (FPSfps) settings in the system. Otherwise, the actual recording speed can differ from the set one.


  5. Click the Apply button.

Setting the video frame rate of the video stream is complete.