Page History

To create and configure the Camera object, do the following:

1. In the context menu of the the Video capture device object, select Create object → Camera.
   Image Modified

2. As a result, the basic settings panel of the object is displayed.
   

   Info
   title Note
   Basic settings are set automatically. If necessary, you can change the ID, object name, and parent object.

3. Click the Click Apply button to create the an object.
4. In the object tree, select the created Camera object.
   Image Modified
5. Configure To configure the created object, do the following:
   

   1. From the Channel number list, select a the physical video output of the card input to which the camera is connected (see Features of video subsystem configuration).

      Info
      title Note
      Channel numbers within one Video capture device object mustn't must not be repeated.

   2. In the Resolution list, select the resolution with which the video signal is captured: Standard—minimum allowable value for the card, High—average value, and Full—maximum allowable value.

      Info
      title Note
      Resolutions supported by video capture cards are given in Appendix 4. Technical specifications of video capture cards. When configuring you configure the camera, which is connected via the SC590N4 video capture card, in Axxon PSIM, you must set the frame resolution equal to the resolution set on the camera. Otherwise, artifacts can appear on the video image. If you are using use the Stretch VRC-6404 HD video capture card, make sure to restart you must restart Axxon PSIM whenever when you change the resolution. Changing the Resolution doesn't guarantee that the resolution of the received video signal changes, as it depends, among other things, on the internal settings of the camera itself. If you need to specify certain streams strictly, it is better to configure multistreaming video.

   3. Click the Apply button to save the settings.

...