Versions Compared

Old Version 6

changes.mady.by.user Yulia Morozova

Saved on

compared with

New Version 7

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To receive multimedia the video stream from a camera via the RTSP protocol, the camera is to must support this protocol. Information on RTSP support is in For the information indicating the support of the RTSP protocol by the camera, refer to the official reference documentation for the of this camera.

For proper operation of the RTSP grabber functionality, make sure that there are no network settings of the used hardware that prevent data transmission via the RTSP protocol.

Info
titleNote.

To If you want to receive the RTSP stream it's required to that comes from the RTSP server of Axxon PSIM (seeConfiguring the RTSP Server module), then you must set the multicast value to the rtsp RTSP parameter in the HKEY_LOCAL_MACHINE\SOFTWARE\AxxonSoft\PSIM\Video\TransportProtocols registry key for a 32-bit system (HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\AxxonSoft\PSIM\Video\TransportProtocols for a 64-bit system) registry section on the computer where the Camera object is created if RTSP stream is received from the rtsp-server of the Axxon PSIM software (see Configuring the RTSP Server module). More . For more information about this parameter see in Changing , see Change the transport protocol used by IP - device section.

To receive a video via the RTSP protocol, do the following:

  1. Create the Video
    2. Capture Device
  2. capture device object
    3. under
  3. on the basis of the Computer object
    4. in
  4. on the Hardware tab of the System settings dialog
    5. box
  5. window (1).
    Image Modified
    6.  
  7. Go to the settings panel
    8. for
  8. of the created object.
    9. Select the RTSP value in
  9. From the Type dropdown list (2), select the RTSP value.
    10. Type-in

  10. In the IP address

    11. of rtsp-stream in the IP

  11. field (3), enter the address of the RTSP stream. The length of the address

    12. is not to be longer than

  12. must not exceed 100 characters.

    The format of the address depends on the camera model and its firmware. It is specified in the technical documentation of the vendor. Generally

    13. it titleExample

  13. , the address looks like this: 
    rtsp://[<username>:<password>@]<IP address of video source >:<port>/<path_to_stream>

    14. Info

  14. .


  15. For the Axis 210A camera, the address of

    16. rtsp-sream

  16. the RTSP stream looks like this:
    rtsp://root:password@10.0.11.121:554/mpeg4/media.amp

    Info
    title
    17. Example
  17. Note
    The address to access
    18. rtsp-
  18. the RTSP stream delivered by
    19. rtsp Server
  19. the RTSP server of Axxon PSIM, looks like rtsp://192.168.0.3:554/1. When
    20. rtsp Server
  20. the RTSP server operates in
    21. the
  21. the Multicast mode, you cannot access it
    22. cannot be accessed
  22. via the RTSP grabber.
    23. Receiving multiple streams via the RTSP driver has been implemented in

  23. Besides, starting with the Drivers Pack v. 3.2.28.1518

    24. and over. Maximum 3 streams are supported. RTSP addresses are semi-colon

  24. version, the system supports receiving multiple streams via the RTSP protocol (multistreaming). In this case, the maximum possible number of streams is three. RTSP stream addresses are separated in the IP address field by the semicolon ";".

    Info
    titleExample

    To get video from two streams,

    25. specify

  25. enter rtsp://admin:admin@10.0.26.16/live/h264;rtsp://admin:admin@10.0.26.16/live/mjpeg in the IP address field.
    To get video from three streams:
    rtsp://admin:admin@10.0.26.16/live/h264;rtsp://admin:admin@10.0.26.16/live/mjpeg;rtsp://admin:admin@10.0.26.16/live/mpeg4

    Starting with the Drivers Pack 3.62.2953 version,

    26. the receipt of an RTSP

  26. the system supports receiving the RTSP stream over HTTPS

    27. stream is supported.Before using this feature, first set the https transport protocol in the rtsp registry key (see Changing

  27. . To do this, you must set the HTTPS transport protocol using the RTSP registry key beforehand (for more information about this parameter, see Change the transport protocol used by IP

    28. -

  28. device

    29. for details on this parameter

  29. ).Example of the link for receiving

    30. an

  30. the RTSP stream over HTTPS

    31. stream InfotitleExample.

  31. :


  32. https://192.168.0.3:443/profile1/media.smp;


  33. https://admin:admin@192.168.0.3:443/profile2/media.smp.

    Note
    title
    34. Important
  34. Attention!
    35. If there are invalid characters in

  35. When you transmit the username or password

    36. (for instance,

  36. that contains invalid characters, including "@"

    37. )

  37. ,via URL, they

    38. are to

  38. must be screened using ASCII codes (hexadecimal format). The "@" character

    39. will be

  39. is screened as %40. For

    40. instance

  40. example, when

    41. connecting

  41. you connect the device over RTSP the link can look like "rtsp://admin:New%40edge@192.168.0.75:554/RVi/1/1".

    42. But

  42. However, if this data is in the login and password fields of the Video capture device

    43. in

  43. object in Axxon PSIM,

    44. then

  44. they stay the same

    45. −

  45. . In this case, "admin" and "New@edge" correspondingly.

  46. Click the Apply button to save the settings of the Video
    47. Capture Device
  47. capture device object (4).
  48. Create the Camera object
    49. under
  49. on the basis of the Video
    50. Capture Device object
  50. capture device object (5).
    Image Modified
  51. Configure the created Camera object
    52. (5)
  52. .
  53. Click the Apply button (6).
  54. Click the Video
    55. button to
  55. field to check if the video is available (7).

If In case the configuration is correct, the video received via the RTSP protocol is displayed in the viewing area. Further actions with the received video stream are performed using the created Camera object.  

Configuring video receipt via the Video-streaming via RTSP protocol is now configuredcomplete.

To receive an audio stream from a camera, you must create and configure the the Audio card and Microphone objects for the audio stream from a camera that is received via the RTSP protocol. For this, select the RTSP type of the Audio audio card (see Registration of audio cards and microphones in Axxon PSIM™ software).

 Image Modified

Further actions with received the audio stream are performed using the created Microphone object.