Versions Compared

Old Version 1

changes.mady.by.user Alina Luchkina

Saved on

compared with

New Version Current

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
Note
titleAttention!
  • We recommend using the PosXml driver for proper operation. If necessary, you can use the MixForward utility with the corresponding plugin to integrate the existing POS systems.
  • If you don't use PosXml, the event source operation in Linux OS as well as the use of Axxon One reports is unavailable.

To configure the To configure a POS device, do as follows:the following:

  1. Create the Event source object; the manufacturer is POSLegasy (see Event source object).

  2. Select the Event source object in the hardware tree on the Hardware tab.

  3. Select the POS device connection type

  4. Select the Event source object.

  5. Select a connection type of the POS device (1).
    Image RemovedImage Added
  6. Specify Set the Server POS device connection port (2).
  7. To connect via the RS-232 interface, select connection the post speed and parity check control (3).
  8. Select the type of your the used POS device (4).

  9. Select Yes in the DOS to WIN Conversion field if the data from the POS device is DOS-encoded (5).

  10. If the data is UTF-8 encoded from the POS device, select select Yes in the Initial UTF-8 Format field to enable the correct display of captions (6).

  11. If a you use the Retalix POS-terminal is used, select select Yes in the corresponding field (7).

  12. Set the maximum size of the UDP datagrams packages in bytes (8). Oversized packets will be The packages whose size is greater than the set one are ignored. 

  13. Click the Apply button.

You have successfully connected your Connecting the POS device is complete.