Go to documentation repository
Page History
...
Outline colors of camera number and
...
surveillance window
| Note | ||
|---|---|---|
| ||
This section describes the default parameters of the color indication of the Surveillance surveillance window borderoutline. They can be changed You can change the parameters during the system configuration—see Configuring the interface of the Surveillance window. |
The color of the Surveillance surveillance window border outline indicates the current camera status.
Color of the Surveillance surveillance window borderoutline | Camera status |
Green | Camera is disarmed |
Yellow | Camera is armed |
Red | Camera is armed, an alarm event occurred is registered on the camera. OR Camera is disarmed, but one or more detection areas are alarmed and an alarm event is detected in them—see also Indication of detection tool status |
The color of the outline of the camera number indicator border in the Surveillance surveillance window indicates the current status of the video recording from the camera.
Color of the camera number borderoutline | Camera status |
Green | No video recording, camera Video isn't recorded. Camera is disarmed |
Yellow | No video recording, camera Video isn't recorded. Camera is armed |
Red | Video recordingis being recorded |
The combinations of theSurveillance surveillance window border outline color and the color of the camera number border outline are described in the following table.
Color of the Surveillance surveillance window borderoutline | Color of the camera number borderoutline | Camera status |
Yellow | Yellow | Camera is armed, no video recording is performed. Video isn't recorded |
Red | Red | Alarm event occurred is registered on the camera or in the alarmed detection area. Video recording is started by an alarm event, or the recording, started by Operatoroperator's command before the alarm event, continues |
Green | Red | Camera is disarmed, but there video is recording recorded by Operatoroperator's command or there is a post-alarm recording |
Yellow | Red | Camera is armed, recording video is recorded by Operatoroperator's command or there is a post-alarm recording is done |
Green | Green | Camera is disarmed, no video recording is performed. Video isn't recorded |
Red | Yellow | Alarm event occurred is registered on camera or in the alarmed detection area, but no video recording by alarm is donevideo isn't recorded |
| Info | ||
|---|---|---|
| ||
If the auxiliary camera detector zone has been armed or disarmed, the border around the Surveillance window retains When you arm or disarm a camera of an additional detection area, the outline of the surveillance window doesn't change its color, but after when an alarm event in the auxiliary zone the Surveillance window border becomes red. Sois registered on the additional detection area, the outline of the surveillance window turns red. Thus, there is no indication of auxiliary detector zone arming and disarming for the camera by the frame of the Surveillance window. See or disarming a camera of an additional detection area for the outline of the surveillance window. See also Indication of detection tool status. |
Icons next to the camera number
The icon of video signal absence 
appears below the icon of "video camera number" only when there is no video signal. It can be in two cases: video camera is not connected or there is camera restartthe camera isn't connected, or the camera is being restarted.
| Info | ||
|---|---|---|
| ||
The last video frame or blue screen (depending on the video capture card) is displayed in the Surveillance surveillance window if there is no video signal. |
The icon of the selected disk absence 
appears above the icon of "video camera number" if if the disk for archive storing is not storage isn't selected (see Selecting the disks for video archive storage).
The icon of the overloaded disk 
appears above the icon of "video camera number" if there are frames skipped during recording to archive recording (it means , the FRAME_SKIPPED events are received, see CAM Camera). You can enable the indication of frames skipping with the ShowFrameSkippedStatus key, see Registry keys reference guide.
When the incorrect camera type is given, the icon of disconnect disconnection with the camera 
appears above the icon of "video camera number," and the frame outline of Surveillance the surveillance window turns black.
Overview
Content Tools