Page History

The PTZ control or Priority parameter (depending on the type of the configured object) gives , determines the privileges to control the PTZ devices device when you use several interface objects are used or several users to control one PTZ device or, if necessary, to control the same PTZ device simultaneouslyby multiple users at a time.

To When you configure interface objects used for the PTZ control, you must select the value of the PTZ control priority is to be selected in parameter from the list of suggested values.

The PTZ control parameter is set for the following objects:

1. Surveillance monitor;
2. Telemetry control panel;
3. Telemetry remote control panel.

Priority The parameter of the PTZ priority control can betake the following values:

1. Control is forbidden (Forbidden). This item forbids PTZ controlWhen you select this item, the control of the PTZ device via the configured object is forbidden.
2. Low (Low priority). PTZ control is the last in the queue after the “normal” and “high” priorities. It is the lowest in the queue in When you select this item, the control of the PTZ device is performed in the last turn after it is controlled by devices with the normal and high priority. This parameter has the lowest queue of the PTZ control.
3. Normal (Normal priority). When you select this item, the control of the PTZ device is performed after it is controlled after by the device with “high” high priority. It This parameter is higher in the queue in of the PTZ control rather than any the device with “low” low priority.
4. High (High priority). This item is set as When you select this item, the control of the PTZ device is performed first in the queue in of the PTZ control. It is This parameter has the highest in queue of the PTZ control queue.

Contextual The context menu of for selecting the PTZ control priority for the Monitor interface object is called PTZ control and consists of contains the Forbidden, Low priority, Normal Medium priority and ,High priority items:

The panel for selecting the PTZ control priority for the Telemetry control panel interface object and the Telemetry remote control system object is called Priority and consists of contains the following items: Forbidden, Low priority, Normal priority and , High priority items:.

If the same In case when one PTZ device is controlled from several workstations with the via interface objects of the same type with the same PTZ control priority, then the following rules apply:priority for controlling this PTZ device, the PTZ device is controlled in the following way:

1. Each Any user can control a the PTZ device when it is not isn't controlled by another user with via the interface of the same control priority.
2. If a In cases when the user who controls the PTZ device via the interface object with a higher priority delegates control to a the user who controls the same PTZ device via the interface object with a lower priority, then this the procedure of delegating control is delayed. The You can set the priority delay time is set with the help of the using the tweaki.exe utility (Axxon PSIM Advanced Setup).

To change the priority delay time using of the PTZ control priority with the tweaki.exe utility, do the following:

1. Run the tweaki.exe utility located in the Tools Tools64 folder of the Axxon PSIM™ software PSIM installation directory.
2. Select the PTZ section (1).
   Image ModifiedSpecify the value of PTZ control priority delay in
3. In the Delay by priority (ms) field
(2)
4. , specify the value of the PTZ control priority delay. 
   The delay parameter is
given
5. specified in milliseconds. The default value is 30000.
6. Click the OK button to save the changes (3).