Page History

The You can create the Relay system object is created under the Video Capture Device on the basis of the Video capture device object.

The Relay object is created and main parameters are set in the following orderTo create and configure the main parameters of the Relay object, do the following: 

1. Go to the Hardware tab in of the settings panel of Axxon PSIM ™ settings panel (1).
2. Create the Relay system object under on the basis of the Video Capture Devicecapture device object or select the corresponding object in the object tree in on the Hardware tab on tab of the settings panel of Axxon PSIM ™ settings panel (2).
   

3. Specify When you create the Relay object (3), you must specify the ID and , the name of the Relay object, and select the Video Capture Device object to become the parent of the Relay object (3)capture device object based on which the Relay object is created.

   Info
   title Note
   If you use the Sensorsensor-Relay relay card is used, then specify that in the Relay object settings, you must specify the video capture card with on the ADC to of which the Sensorsensor-Relay relay card is connectedinstalled.

4. Select the Channel channel number matching in accordance with the number of the output connector to which the relay is connected physically (4).

5. In the Executor dropdown drop-down list, select the type of the executive device used as the relay in on the guarded area protected facility (5).
   The Executor parameter is used for selecting the icon that is displayed on the interactive map. This parameter is essential required for the better perception of information (by the operator that is displayed on the map as object icons) by Operator and for real-time intercepting by Operator if , as well as for the rapid operator reaction if such is required.
   The types of executive devices available for the Relay system object are given in the table.

   Executive  device	Description
   Light	Icon The icon of the interactive map for the device responding  responding to changes in the illumination in on the guarded areaprotected facility
   Signal	Icon The icon of the interactive map for the device device responding to the background sound changes in on the guarded areaprotected facility
   Lock	Icon The icon of the interactive map for the device device responding to locking/unlocking a window, door, etc.and so on

6. Click the Apply button to save the changes.

Creating and configuring the Relay system object is completedcomplete.