Page History

...

Features of running the SL USBIO 16x8 card drivers

Running The startup of the SL USBIO 16x8 card device drivers in Windows OS can take up to 10 minutes. To reduce this time to 2 two minutes, use the utility to configure the USB device sensor/relay "SL USBIO 16x8 − it can be downloaded at " which you can download at the AxxonSoft website.Set a

In this utility, you must set the lower value of the TimeOut PowerUp parameter for each device in this utility (the recommended value is 10-20 10—20 seconds). The utility does not doesn't provide the ability to select a the specific device, so you should must connect one SL USBIO 16x8 device to the computer in turn, disconnecting others.

You must run Axxon PSIM is to be started after running drivers after completing the driver startup of SL USBIO 16x8 devices (you can control the driver status of the drivers via the Windows Device Manager).

If you set the auto start of Axxon PSIM is configured PSIM using the Auto Startup feature in Windows OS, then you must configure the delayed start of Axxon PSIM at to be at least 2 two minutes after the operating system rebootsrestarts.

If Axxon PSIM starts as a the Windows OS wrapper, safe we don't guarantee the stable operation of the SLIO USBIO 16x8 card is not guaranteed in Axxon PSIM. In this case, select we recommend selecting another way to start Axxon PSIM (see Configuring system startup and shutdown section the Configuration of Axxon PSIM™ software startup section in Administrator's Guide).

Connecting relays

The Relay objects corresponding to relays connected to the SL USBIO (4x4, 16x8, and 24x4) card (executive devices) are created under the Video Capture Device objects of the in the hardware tree based on the Video capture device object with the SL USBio type.

When configuring you configure the Relay objects one is to in Axxon PSIM, you must specify the channel numbers of the relay connection (executive devices) to the card. Channels are numbered according to The channel numbers are allocated in accordance with the external pinout of the card (see see Appendix 5. Electrical and technical specifications of Sensor-Relay cards).

To change the channel numeration, use the Channel Numbernumber list on the settings panel of the Relay object.

Connecting sensors

The Sensor objects corresponding to sensors connected to the SL USBIO (4x4, 16x8, and 24x4) card are created under the Video Capture Device objects of the in the hardware tree based on the Video capture device object with the SL USBio type.

When configuring To configure the Sensorobjects one is to  objects in Axxon PSIM, you must specify the channel numbers of the sensor connection to the card. Channels are numbered according to The channel numbers are allocated in accordance with the external pinout of the card (see Appendix 5. Electrical and technical specifications of Sensor-Relay cards).

To change the channel numeration, use the Channel Numbernumber list on the settings panel of the Sensor object.