Page History

After adding you add a camera to in Axxon One, in Axxon PSIM two ONVIF-Server Profile objects will be created under ONVIF-Server object for on each camera added to the corresponding RTSP Serverbound RTSP Server are created on the basis of the ONVIF-Server object in Axxon PSIM. These objects correspond to the video streams of low and high quality in Axxon One.

...

If user rights are configured in you configure user permissions in Axxon PSIM (see Configuration of users and permissions), then the login specify the Axxon PSIM username and password are to be specified in order to connect to the a camera. Otherwise, there is no need to specify any login or the username and password.

If required it is possible to necessary, you can select the required video stream in from the Stream drop-down list. Available You can configure available camera video streams areconfigured on the settings panel of the Camera object—see object, see Configuring the multistream video.

When changing you change the camera parameters in Axxon One, the corresponding changes will be are applied in Axxon PSIMtoo. For instance, for example, if the you enable a microphone, PTZ, analytics, metadata data transmission and sensor/relays are enabled , sensors/relay, and so on in Axxon One, then the corresponding settings are applied set for the ONVIF-Server Profile object inAxxon PSIM:

1. PTZ. PTZ object is to be created and configuredin Axxon PSIM in order tocontrol PTZ on If you want to control the PTZ camera connected via the ONVIF-Server on in the client . See PTZ configuration section in that receives the video data from the ONVIF-Server, you must create and configure the PTZ device object for this camera. See also Installing and configuring security system components guide, the PTZ configuration section).
2. Microphone, Audio stream. Audio card and Microphone objects are to be created and configuredin Axxon PSIM in order If you want to receive and record audio from the ONVIF-Server on in the client . See Configuring audio acquisition from IP devices section in that receives the video data from the ONVIF-Server, you must create and configure the Audio card and Microphone objects in Axxon PSIM. See also Installing and configuring security system components guide, the Configuring audio acquisition from IP devices section.
3. Analytics, Metadata. If you want to receive and record the metadata as well as the analytics data from the ONVIF-Server in the client that receives the video data from the ONVIF-Server, you must create and configure the Tracker and VMDA detection objects are to be created and configuredunder on the basis of the corresponding Camera object in Axxon PSIMin order toreceive and record metadata and analytics data from ONVIF Server on the client. See also Configuring smart video detection tools. In Axxon One, you must create the ONVIF events detection is to be created detector for the added camera.

Besides, there are the following checkboxes on the settings panel of the ONVIF-Server Profile object:

1. Fixed—disables deleting the profile using the driver.
2. Multicast—enables video transmission in the multicast mode. There are some extra actions besides Besides the option of setting the checkbox checkedto enable the multicast, you must perform the following actions:
   1. Set the registry key:
      HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\AxxonSoft\PSIM\Video\TransportProtocols 
      rtsp = multicast
   2. Enable the multicast mode on the settings panel of the RTSP Server object corresponding to the ONVIF-Server object—see Configuring the RTSP Server module.