Versions Compared

Old Version 2

changes.mady.by.user Ludmila Tanova

Saved on

compared with

New Version Current

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The To set the network settings of the Axxon PSIM SIP server are set in -terminal, do the following order:

  1. Go to the settings panel of the SIP-terminal object.
  2. Set the Terminal type switch to the SIP server server position (1)  — the —the SIP-terminal acts as a server, any SIP - clients can be connected connect to it (, both Axxon PSIM-based and the third-party SIP - devices).
  3. From the Network drop-down list (2), select the IP address of the network adapter that will be is used to connect to the network where the SIP - clients are located.
  4. In the SIP port field (3), specify the port number which will receive that receives the data from clients via the SIP -clientsprotocol.
  5. From the SIP transport drop-down list (4), select the used transport level protocol to be used: TCP or UDP.
  6. If necessary, specify the RTP ports port range in the corresponding text fields (5).
  7. Click the Apply button (6).

The Setting the network settings of the the Axxon PSIM's SIP server are set SIP server is complete.