Page History

...

1. Start Camera discovery tool.
   
2. In the Brand list (2), select ONVIF or ONVIF 2.X.
3. In the Model list (3), select the number of device channels.
4. In the Firmware list (4), select auto.
   As a result, the discovered devices are displayed in the Brand list (2). If the required device isn't displayed, proceed to the next step. If the device is displayed, proceed to step 6.
5. Add the device manually:
   1. In the IP address field (12), enter the IP address of the device.
   2. In the Port field (13), enter the TCP/IP port number.
   3. In the Brand list (14), select ONVIF or ONVIF 2.X.
      

      Info
      title Note
      To use multistreaming via the ONVIF protocol, select the ONVIF 2.Х X brand and the 1-channel-multistream model. You can configure the streams of the connected ONVIF device in the standard way (see Configuring the multistream video).

   4. In the Model list (15), select the number of device channels.
   5. In the Firmware list (16), select auto.
   6. Click the Add button (17).
      As a result, the ONVIF device with the specified parameters is displayed at the top of the Camera discovery tool window.
6. In the Settings list (5), select: 
   1. Video server settings, if you want to send the settings specified in Axxon PSIM to the device when you add it.
   2. Device settings, if you want to use the device settings.
7. Enter login (6) and password (7) to connect the ONVIF device. The login and password are specified in the documentation for the network device that you connect.
8. Check if the TCP/IP port (8) is correct. If necessary, enter the required value in the field.
9. Select the objects that you want to create on the basis of the ONVIF device by setting the corresponding checkboxes (9).
   

   Info
   title Note
   For more information, see Camera discovery tool.

10. Click the Apply button (10) for one device or the Apply button (11) if several devices are selected.
    The selected objects are automatically created in the object tree on the Hardware tab.
    
11. Click the Exit button (18) to close the Camera discovery tool window.

...