Page History

In Intellect video can be received Axxon PSIM, you can get a video via HTTP protocol from specific cameras that enable viewing web cameras, allowing you to view a video in the a web browser at through the known HTTP address.  MJPEG You can get a video from both a single-thread and multi-thread camera (up to four threads)—both methods are described below. MJPEG and MPEG2 codecs are supported.

To add the device that transmits a video via the HTTP protocol, do the followingAdd a device streaming video via HTTP protocol as follows:

1. Create the Video capture
device based
2. device object on the basis of the Computer object
in
3. on the Hardware tab of the System settings dialog
box (1)
4. window.
   Image Modified
Select WebPlayer in the Type dropdown list (2)
5. From the Type drop-down list, select WebPlayer.
6. From the Model drop-down list, select Generic camera.
7. From the Firmware drop-down list, select auto.
8. In the IP address
 field
9. field, specify the address to get a video from
the web camera (3)
10. a web camera. Any format of IP address is possible.
Do not
11. Don't use the URL
at
12. through which video viewing
video
13. in the browser is available as the address
,
14. ; use the address of the video stream that is
streamed
15. displayed on
a
16. such page. Sometimes you can find it
can be found
17. in the source code of the page. 
    Examples of addresses:
    http://81.25.231.7:28080/stream/live
    http://root:1@10.0.40.248:80/mjpg/1/video.mjpg
 –
18. —the address to get a video from the Axis camera that supports video
streaming
19. transmitting in the corresponding format.
20. Click the Apply
 button (4)
21. button.
22. Create the Camera object
based
23. on the basis of the created Video capture device object.
    Image Modified
24. Click the Apply button.

The device streaming Adding the device that transmits a video via the HTTP protocol is now addedis complete.

To add a device with multiple channels, do the following:

1. Create the Video capture device object on the basis of the Computer object on the Hardware tab of the System settings dialog window.
   Image Added
2. From the Type drop-down list, select WebPlayer.
3. From the Model drop-down list, select 4 channel IP server.
4. From the Firmware drop-down list, select auto.
5. In the IP address field, specify the address to get a video from a multichannel camera. Note the following:
   1. You must list addresses using the “|” character for different channels;
   2. There can be four channels maximum;
   3. You can list addresses of different threads for one channel using a semicolon;
   4. Don't use the URL through which video viewing in the browser is available as the address; use the address of video streams that are displayed on such page. 
      

      Info
      title Note
      Example of an IP address for the Axis 2400 camera with two channels: http://192.168.3.157/axis-cgi/mjpg/video.cgi?camera=1|http://192.168.3.157/axis-cgi/mjpg/video.cgi?camera=2 Here, the URL format is used—http://<ip>/axis-cgi/mjpg/video.cgi?camera=<channel>, where <channel> is the number of a channel starting from 1.

6. Click the Apply button.
7. Create the Camera object on the basis of the created Video capture device object.
8. Click the Apply button.

Adding the multichannel device using the WebPlayer driver is complete.