Go to documentation repository
Page History
To initiate recording by acoustic start, you must arm the microphone should be armed. To arm a the microphone, select it in the microphone list and click
.
If the sound level when arming a microphone is lower that the threshold acoustic start levelWhen you arm the microphone and its signal level is less than the threshold level of acoustic start, the microphone status indicator becomes turns yellow.
If the sound level at the time of arming When you arm the microphone (or at any other time after the microphone has been armed) arming) and its signal level exceeds the threshold level of acoustic start, recording is initiated (the ACCU_START event is received from the microphone, and asterisks appear to the right of the Volume level, the recording starts slider on the settings panel of the Microphone object), and the microphone status indicator becomes turns red.
The The recording will continue continues as long as the microphone sound signal level is above exceeds the threshold level of acoustic start level. If the microphone sound signal level decreases below the threshold level of acoustic start level, the recording stops (the ACCU_STOP event is received from the microphone, and asterisks disappear to the right of the Volume level slider on the settings panel of the Microphone object 
), and the microphone status indicator becomes turns yellow.
To disarm the microphone and stop recording, press click the
button.
| Info | ||
|---|---|---|
| ||
The For more information on setting up the recording by acoustic start of the Microphone object, see Setting up the audio trigger recording. |
Overview
Content Tools