Go to documentation repository
Page History
...
On modern computers, the energy-saving mode is activated in BIOS by default. Using this mode on multiprocessor systems leads to a partial load of CPU cores and reduces the performance of the Iinput/O output subsystem.
For better performance of Axxon PSIM, you must configure the computer BIOS as follows:
| Note | ||
|---|---|---|
| ||
Different manufacturers of motherboards call these technologies differently. So, for each specific motherboard model, you must always check the documentation for that model to find out the name of the technology. |
| Action | Technology | Reason |
|---|---|---|
| Enable | E-Cores | To get the calculation results with the actual load |
| Disable | Turbo Boost | The clock rate and displayed CPU load can vary from server to server depending on the cooling system |
| Hyper- |
| Threading | Uneven load of processor cores |
| Intel Speed Shift | To keep the processor clock from dropping below the base clock |
| Enhanced Intel SpeedStep (EIST) | Reduces the operating clock of the CPU |
| Energy saving | To keep the processor clock from dropping below the base clock |
| Smart throttling | Abrupt reset of processor clock |
Overview
Content Tools