Versions Compared

Old Version 1

changes.mady.by.user Yulia Morozova

Saved on

compared with

New Version Current

changes.mady.by.user Bahdan Tsiulkou

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

Axxon PSIM software provides  provides an audio and video synchro recording option.

Audio signal recording begins at the recording start time when video recording starts and ends at when video recording end timestops. In synchro record recording mode, audio files are stored with video files in the Server server archive in the " VIDEO " folders on the Server server archive local disks.

To use the synchro recording option, you must configure the Axxon PSIM software audio subsystem is to be properly configured. The . For the information on how to configure an audio subsystem configuration procedure in Axxon PSIM system is described in , refer to Configuring audio subsystem section.

Note
titleAttention!

If you create a camera and microphone configured for synchronous video- and audio record are created on the basis of based on different Computer objects (for example, server/RAW Server/RAW and Client) , than synchronous audio record will be performed only when disks for archive record on both computers have identical letters (see also Selecting the that are configured for synchronous video and audio recording, then synchronous audio recording is performed only if there are disks for archive recording with identical letters on both computers (see also Select disks for audio archive storage and Selecting the Select disks for video archive storage).

If you configure the audio subsystem is configured, then do the following to configure synchro recording on the selected camera and microphone: 

  1. Go to the Hardware tab in the System settings dialog box (1) window.Select the
  2. In the object tree on the Hardware tab, select the Camera object corresponding to the
    3. required camera in the objects tree (2). The settings panel for the selected object is displayed on the right of the Hardware tab
  3. adjusted camera.
  4. Go to the Basic settings tab on the settings panel of the Camera object (3).
    Image Modified

  5. In

    the Number dropdown list of

    the Recording audio table, from the Number drop-down list, select the ID

    of

    assigned to the microphone that is set for synchro recording when

    being registered in

    you register it in Axxon PSIM

    (4)

    .

     

  6. After the number is set, the name of any selected Microphone object is automatically displayed when clicking on any area of the Microphone column in the table (5).

  8. Click on any area of the table in the Microphone field, after which the name of the selected object is automatically displayed.

  9. To perform If synchro audio recording from 2 two microphones is to be performed, then repeat steps 4-5 for the second microphone.

    Info
    titleNote.

    Audio from two Microphones microphones is recorded to one stream.

  10. Click the Apply button (6).

Camera Configuring the camera and microphone are now configured for synchro video and audio and video synchro recording is complete.

Tip

Synchronous playback of video and audio recordings

Audio Synchronous video and video synchronous audio recording