Page History

The Backup archive panel interface object is designed for configuring the Backup backup archive panel, which is used for starting and monitoring the status of the backup archiving process, as well as changing its the parameters and monitoring of the backup processarchiving.

To configure the main parameters of the Backup archive panel interface object, do the following:

1. Go to the Interfaces tab in the System Settingssettings dialog box window (1).
2. Select the Backup archive panel object in the objects tree of on the Interfaces tab (2). The settings panel for this object opens is displayed on the right of the Interfaces tab.
   Image Modified
3. In Select the object list, select that Backup archive object (3) from the drop-down list for which this panel is to be created (3).To set the exact position created.
4. From the Monitor drop-down list (5), select the number of the computer monitor in the operating system on which you want to display the interface window.
5. Set the Fixed position checkbox (4) if you want to specify the accurate values of the Backup archive panel
box
6. window position on the screen
, set the Fixed position checkbox (4)
7. .
   As a result, the X, Y, W
and
8. , H fields
are
9. and the Image Added button become available for editing and specifying the position via the test window. 
10. Set the position of the Backup archive panel interface window in one of the following ways:
    1. Manually:
       1. Specify the coordinates of the backup archive panel position on the screen. To do this, change the values in the X and Y fields (6).
          The values of the X and Y fields correspond to the coordinates of the upper left corner of
the box, in percentage of the corresponding screen dimensions (5)
11. 1. 1. the backup archive panel position on the screen and are expressed as percentages relative to the screen size horizontally and vertically.
       2. Specify the width and height of the Backup archive panel window displayed on the screen. To do this, change the values in the W and H fields (
W) and height (H) of the window, in percentage of the corresponding dimensions of the screen (6).
12. Click the Apply button (8).
13. 1. 1. 7).
          The values of the W and H fields are expressed as percentages relative to the screen size horizontally and vertically.
    2. Using the test window:
       1. Click the Image Added button (8).
       2. Place the Specify dimensions opened test window where the Backup archive panel window must be displayed:
          Image Added
       3. Click the OK button.
          As a result, the coordinates in the X, Y, W, H fields are set in accordance with the size and position of the test window.
14. Click the Apply button.

Configuring the The Backup archive panel interface object is now configuredcomplete.

...