Page History

You can create IP devices in Axxon PSIM as follows:

1. Go to the Hardware tab tab (1) in the System settings dialog box (1).
   Image Removed window.
2. In the object tree, select the Camera Computer object (2) corresponding to the configured Server (2)server.
3. Click the Camera discovery tool button (3) on the setting settings panel of the selected object (3).
   Image Added
   

   As a result, the IP Wizard window is displayed Camera discovery tool window opens. Found IP devices are displayed on at the top of the window.

   The IP Wizard window can also be displayed by selecting the

   Note
   title Attention!
   Video capture cards can also be displayed in the list. However, it is strongly NOT recommended to add we highly do not recommend adding them to the configuration from using the IP Wizard Camera discovery tool window. Configure You can configure video capture cards manually as described in , see Configuring video capture cards in Axxon PSIM™ softwarePSIM. By default, the list also displays the found obsolete archive devices that are no longer supported in the installed version of the Drivers Pack version. If you don't want to display such devices should not be displayed, create a the UseObsoleteAttribute registry key UseObsoleteAttribute=with the 1 value (see Registry keys reference guide).
   Info
   title Note

   Image Added
   To sort devices in the Camera discovery tool

   item in the context menu of the Computer object.

   Image Removed
   Image Removed
   Click column name to sort devices by value in the column. Data are window, click the name of the corresponding column. The data is sorted alphabetically, including IP addresses. For example, when you sort IP addresses are sorted in ascending order, 10.0.12.98 is lower than 10.0.12.252 in the list.

4. If the required device is not isn't displayed in the list, try clicking click the Search button (1). Wait for the list is updatedto update, as the device search can take several seconds. If you click the Search button again during the search, the current search is stopped and the new one is started.
   

   Info
   title Note
   If necessary, you can increase the wait time for a response from the device by setting the additional time in milliseconds in the parameter of the AdditionalSearchTime registry key (see Registry keys reference guide, for more information on working with the registry, see Working with Windows OS registry).

5. Check the correctness of the brand Check up the vendor (2), model (3) and , and firmware (4) for the found IP device. Make changes if necessary If necessary, make changes by opening the drop-down list and selecting the required value.
6. From the drop-down list (5), select which settings which should must be installed set on the IP -device while its adding device when you add it to the device hardware tree: leave installed the specified device settings or apply the video server settings.
7. Check up the correctness of the TCP/IP port (8). Specify If necessary, specify the required value in the field.
8. Specify the login (6) and password (7) to connect the IP device. Login and password are specified in the documentation for the connected network device.
9. If necessary, add additional information to the beginning of the names of created objects (for example, the path where the object is located). Enter this information the value in the Added string field String to add field (12). You can use Limitations: Latin and Cyrillic letters and , service characters except for the > and < symbolscharacters; the number of characters limit is up to 60 including the length of the object name, which is set by default. The setting will be is applied to the selected objects which you can select in the next step.

10. Select the objects that are to be created under you want to create on the basis of the IP device.

    Info
    title Note
    The number of objects that can be created under you can create on the basis of the IP device is automatically displayed automatically in the the Hardware available for adding table (10).

    1. Open Expand the drop-down list of objects supported by the IP device by clicking the + button.:
       
       Correspondence of object names in IP Wizard the Camera discovery tool window to the branches of the object tree is given in the table.

       Name of object in

       IP Wizard

       the Camera discovery tool window	Branch of object tree in Axxon PSIM
       Video channel	The Video

       Capture Device

       capture device object → The Camera object
       Audio input	The Audio card object → The Microphone object
       Contact	The Video

       Capture Device

       capture device object → The Sensor object
       Executive device	The Video

       Capture Device

       capture device object → The Relay object
       Telemetry line	The Telemetry controller object → The PTZ device object
       Audio output	The Playback card object → The

       Loudspeaker

       Speaker object

    2. Set the checkboxes for next to the objects that are you want to be createdcreate.

       Info
       title Note
       To To create/delete all objects, set the checkbox checked/unchecked /clear the checkboxes next to the vendor brand of the IP device.

11. Click the Apply button for one device each selected device (9) or for all selected devices (11) if several devices are selected.
    The selected objects are created automatically in the Hardware object tree on the Hardware tab. 
     

12. Repeat steps 4-8 for each IP device that is you want to be created create in the system.

    Info
    title Note
    To delete the IP - device from the IP Wizard window Camera discovery tool window, right-click the corresponding line in the table and select the Delete camera <IP address> from the list item. To delete the IP - device object or objects created under on the basis of it from the hardware tree by means of the IP Wizard, set the checkboxes unchecked for Camera discovery tool, you must clear the set checkboxes next to the corresponding objects and click the Apply button.

13. If the IP device has not been isn't found, then you can add it manually.

    1. From the
Vendor
14. 1. Brand, Model, and Firmware drop-down lists, select the brand, model, and firmware installed on the IP device
accordingly
15. 1. (13-15).
    2. In the IP address and Port fields (16, 17), specify the IP address of the device and the number of the TCP/IP port.
    3. Click the Add button (18).
       As a result,
The
16. 1. the IP device with the specified parameters is displayed
on
17. 1. at the top of the window.
11.
18. To complete the IP device creation, repeat steps 6-8.
12.
19. Click the Exit button to close the
IP Wizard window
20. Camera discovery tool window (19).

IP device creation is completedcomplete.