Page History

CONNECTED

Connecting

Event The event is generated when a Client is connected client connects to the Serverserver

DISCONNECTED

Disconnecting

Event The event is generated when a Client is disconnected client disconnects from the Serverserver

KEY_IGNORED_HW

Key ignored (mismatch of card codes)

Event The event is generated if codes of cards (or HID) in the key mismatch to the current codes of the computer

KEY_IGNORED_SW

Key ignored (limitation exceeded)

Event The event is generated if there are software limitations. For example, if key is accepted but the number of created objects in the objects hardware tree is more greater than specified in the key

KEY_UPDATED

Key updated

N/A

PROTOCOL_RCVD

Protocol received

N/A

REBUILD_IN_START

Start of archive re-indexing

N/A

REBUILD_IN_STOP

End of archive re-indexing

N/A

REGISTER_ATTEMPT

Attempt of unauthorized access

N/A

REGISTER_ERROR

Limit of access attempts is exceeded

Event The event is generated when the user failed fails to enter the system a lot of many times. Some A certain timeout is started occurs after the event when the user can’t try to cannot enter the system. Number You can change the number of attempts and timeout can be changed by using the registry

REGISTER_USER

User registration

This event is generated when the user tries to enter the system (when entering you enter login and password)

DISC_EXIST

Disk for archive record recording exists

N/A

NO_DISC

There is no disk for archive recordrecording

N/A

KEY_IGNORED_FR

Key ignored

Event The event is generated in case of the key file is not isn't recorded on the discdisk

SHUTDOWN

Shutdown

N/A

DISC_MOUNT

Disc connected (mounted)

N/A

DISC_UNMOUNT

Disc disconnected (unmounted)

N/A

ARCHIVE_DEPTH

Archive depth

Event The event is generated at midnight and contains the information about archive depth on all disks in hours (the depth<> parameter). To call the event manually, use the GET_DEPTH reaction.

Archive When you display an event in the event viewer, specify the archive depth in the Days:Hours format is specified in the Additional information field of the Event Viewer when displaying an event. Also, this information contains is contained in parameter of the param0<> event parameter.

Archive The archive depth is counted as discrepancy between the date of creation of the oldest archive file and the date of creation of the newest archive file (on the disk or by a camera)

Not generated by default. Set To enable it, set NotifyExpireLic = 1 to enable (see Registry keys reference guide).

The In the days<> parameter shows , specify the number of days left till until the license expiration (can be non-integera fractionalnumber). The event is generated at when you start Axxon PSIM start-up and when after the day changes

"SETUP"—set parameters for a computer

display_id<>

Display ID

drives<>

Disks for record of recording the video archive

drives_a<>

Disks for record of recording the audio information

flags<>

Flags

arch_days<>

Size of event Event archive size

connection<>

Connection

disable_protocol<>

Disable protocol

ip_address<>

Device IP - address of device

is_backup<>

Backup

is_load<>

Loaded

local_protocol<>

Local protocol

modem<>

Modem connection

name<>

Object name

password<>

Password

sync_time<>

Time synchronization

username<>

User name

"BACKUP"—backup database

-

N/A

"CONNECT_ONE"—connect to a the computer. Connects the corresponding computer. It is recommended to We recommend you avoid using of this reaction manually

-

N/A

N/A-

"CONNECT_OTHER"—connect to cores. Connects the computer to other cores from the configuration. It is recommended to We recommend you avoid using of this reaction manually

-

N/A

N/A-

"DISCONNECT_ONE"—disconnect from the computer. Disconnects the corresponding computer. Core In case of disconnection, the core can be connected automatically in case of disconnection. It is recommended to . We recommend you avoid using of this reaction manually

-

N/A

N/A-

"SYNC_PROTOCOL"—run the SyncProtocol.exe utility of protocol synchronization. Protocol merging is happened if If the synchronization is configured

-

, the protocol merges

N/A

N/A-

"SYNC_TIME"—synchronize time. To perform this reaction it is required to create , you must create the SyncTime parameter with value 1 on the system to which reaction was is addressed in the HKEY_LOCAL_MACHINE\SOFTWARE\AxxonSoft\PSIM (HKEY_LOCAL_MACHINE\Software\Wow6432Node\AxxonSoft\PSIM registry section for 64the 32-bits bit system) registry section

-

N/A

N/A-

"CREATE_PROCESS"—run process

command_line<>

Command line. Commands of the Windows command line written without hyphens through the |, & or && separating characters

"SEND_MY_CONFIG"—send configuration. Send configuration to other computers. The same as “SPREAD_CONFIG”

-

N/A

N/A-

"MOVE_CONFIG"—move configuration. Moves configuration created in the objects tree on the basis of the computer–supplier computer-supplier to the computer–recipientcomputer-recipient

from<>

Supplier

to<>

Recipient

"SPREAD_CONFIG"—spread configuration. The same as “SEND_MY_CONFIG”

-

N/A

N/A-

"GET_DEPTH"—get the archive depth. The ARCHIVE_DEPTH event (see the table belowabove) is formed in response to a reaction in the system. Absence of one or both parameters concedes request of depth by records for all possible parameter values of parameter

cam<>

Camera ID for which the archive depth is required

drive<>

Disk or the network path on which the archive depth is required.

Name The name of disk is specified in the following format: "<letter of disk>:\\", for example, drive<D:\\>

Note. The "\" symbol character is an the escape character.

Network The network path is specified in the UNC format

"ACTIVATE_DISPLAY"—change the display. The command allows showing the Display display with the given specified identifier on the monitor (monitors) of the computer