Versions Compared

Old Version 1

changes.mady.by.user Alena Kniazeva

Saved on

compared with

New Version Current

changes.mady.by.user Alina Luchkina

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

To configure the the SNMP Agent integration module, do the following:

  1. Go to the settings panel of the SNMP Agent object.
    Image Modified
  2. If you want to configure the configuration download, expand the Configuration settings parameter list:
    1. In
    3. the 
    1. the MIB configuration directory
    4.  field
    1.  field, specify the path to the folder with MIB configurations.
    2. To use named OIDs, in
    5. the 
    1. the Named OIDs field, select the Yes value. By default, the No value is selected.
  6. In the
    7.  IP
  7.  IP Address
    8.  field
  8.  field, specify the IP address in the network of the device that is connected via SNMP protocol.
  9. In
    10. the 
  10. the Polling port
    11.  field
  11.  field, specify the number of the port that you use. The default number
    12. is 
  12. is 161.
  13. From the
    14.  SNMP
  14.  SNMP protocol version
    15.  drop
  15.  drop-down list, select the version of SNMP protocol:
    Note
    titleAttention!

    You must select the version

    16. of SNMP

  16. of SNMP protocol according to the technical requirements of the connected device (see the official documentation for the device).

    1. SNMP v1, 
    2. SNMP v2, 
    3. SNMP v3.
  17. Depending on the selected version of SNMP protocol, make the appropriate settings.
    1. To configure
    18. the 
    1. the SNMP v1
    19.  and 
    1.  and SNMP v2 versions, expand the SNMP v1-2 settings parameter list:
      1. In the
    20.  Read
      1.  Read community string
    21.  field
      1.  field, specify the name of the SNMP read community from the web interface settings of the device connected via SNMP protocol.
      2. In
    22. the 
      1. the Write community
    23. string 
      1. string field, specify the name of the SNMP write community from the web interface settings of the device connected via SNMP protocol.
    2. To configure
    24. the 
    1. the SNMP
    25. v3 
    1. v3 version, expand the SNMP v1-2 settings parameter list:
      1. From
    26. the 
      1. the Authentication type
    27.  drop
      1.  drop-down list, select the authentication type from the web interface settings of the device connected via SNMP protocol: 
        1. SHA256 (default), 
        2. SHA384, 
        3. SHA512, 
        4. MD5, 
        5. SHA1.
      2. From
    28. the 
      1. the Encryption type
    29.  drop
      1.  drop-down list, select the encryption type from the web interface settings of the device connected via SNMP protocol: 
        1. AES192 (default), 
        2. AES256, 
        3. AES, 
        4. DES, 
        5. TripleDES.
      2. In
    30. the 
      1. the Password
    31.  field
      1.  field, specify the user password from the web interface settings of the device connected via SNMP protocol.
      2. In
    32. the 
      1. the Secret key
    33.  field
      1.  field, specify the secret key from the web interface settings of the device connected via SNMP protocol.
      2. In the Username field, specify the username from the web interface settings of the device connected via SNMP protocol.
  34. Click the Apply button to save the changes.
  35. To automatically download the configutation and build the hardware tree, click the Image Modified button and select Download configuration from the drop-down list.
  36. Click the Apply button.

Configuration of the the SNMP Agent integration module is complete. As a result, the hardware tree will be built: