Page History

 To configure the Monitoring interface object, do the following:

1. In the object tree, select the Monitoring object. On the right side of the System settings dialog box, the settings Go to the settings panel of the relevant Monitoring object is displayed.
   
2. Set the checkboxes next to the alarm groups that should must be visualized (1). The . You can rename the Extra 1 and Extra 2 groups of alarms can be renamed (2).

3. If it is necessary you want to display the Owners panel component on the screen, set the Owners panel checkbox and specify the component position coordinates coordinates on the monitor screen.  Also, from From the Monitor drop-down list, select the number of the physical monitor , which coordinates should the coordinates of which must be specified (3). You . You can also set the scaling of objects from 100% to 500%.

   Info
   title Note
   If the scaling parameter exceeds 110%, then the high-resolution icons will be are displayed on the object, and the Courier New font will be is used for the text in the object title; otherwise, otherwise—MS MS Sans Serif is used.

4. If it is necessary you want to display the Control panel component on the screen, set the Control panel checkbox and specify the component position coordinates on specify the component coordinates on the monitor screen.  Also, from From the Monitor drop-down list, select the number of the physical monitor , which coordinates should the coordinates of which must be specified (4).   You can also set the scaling of objects from 100% to 500%.

   Info
   title Note
   If the scaling parameter exceeds 110%, then the high-resolution icons will be are displayed on the object, and the Courier New font will be is used for the text in the object title; otherwise, otherwise—MS MS Sans Serif is used.

5. If it is necessary to you want to display the Log panel component on the screen, set the Log panel checkbox and specify the component position coordinates on specify the component coordinates on the monitor screen.  Also, from From the Monitor drop-down list, select the number of the physical monitor , which coordinates should the coordinates of which must be specified (5).
6. Set the Non-empty Comment field checkbox, if it is necessary for field checkbox so that the operator to comment comments on this an alarm and/or their its actions , when accepting the this alarm (6). This comment can be viewed . You can view this comment later in the event log, as well as the name of where the operator who received the an alarm is also indicated.
7. By default, you can filter objects can be filtered by the Alarm and Failure events as well as by the Connected and Disconnected states. Clear To disable this option, clear the Use filter by events checkbox to disable this feature (7). As a result, the corresponding drop-down list for selecting events becomes disabledunavailable.
8. When you try to view live video and If you want to display a the warning indicating that it the video stream transmission can create the critical load on the channel when viewing the live video, you must set the Warning when watching live video checkbox (8).

9. If the Agents Of Control and Additional workplaces modules are in different subnets and the subnetworks, the Monitoring PSIM components are not in a aren't combined into the common distributed system configuration in the Axxon PSIM object tree, and Data gateway is in use for transmission of used to transmit the live video to to Additional workplaces, set the Viewing live video through gateway checkbox (9).

   Info
   title Note
   For the details about the information on how to create and configure the Data gateway object, see Creating and configuring Data Gateway.

10. To add the All cameras of Partition Of Control item to the object's Video image playback context menu which enables viewing video from all of partition of control item to the Video image playback item that allows displaying all the cameras of the selected Partition Of Controlcontrol partition, set the Viewing live video from all cameras (add.) checkbox (10).

11. In the Video stream speed field, enter the number of frames per second of the video image frame rate when viewing the live video or archive video (11)a video from the archive. This parameter is used to limit the data flow between the Server Of Control and the Agent Of Control (for example, in case the communication channel has low bandwidth).

    Info
    title Note
    The Video stream speed setting works for the archive video only when you use CamMonitor.ocx of version 4.11.0.1766 and higher. If the archive is recorded with the H.264 codec and the video stream speed is set to more than  than 0 frames per second, then the archive video will be is played back only by reference frames. If the value of the video stream speed is 0, then the live and archive video will be played back without scaling.

    Select

    aren't decimated.

12. From the Compression drop-down list, select the required compression rate for the live video
from the Compression drop-down list (12)
13. .

14. If it is necessary you want to set the cameras for which that the user should be prohibited from viewing must not see when viewing the live video, do the following:

    1. Click the Cameras... button (13).

    2. The settings window will openopens:
       

    3. In the User drop drop-down list (1), select the user to whom the prohibition should be appliedyou want to set the restriction.

    4. The List of cameras prohibited for viewing field (2) displays the cameras prohibited field displays the cameras prohibited from viewing for the selected user. To add a camera to the list, select the required object from the Object drop drop-down list (3) and list and click the button.

       Info
       title Note
       The Object list contains only those objects that have cameras.

    5. A The window with a the list of cameras of this object will openopens:
       

    6. In the left part of the window, select the cameras that should must be prohibited from viewing, and move them to the right part of the window using the button. Then click the Apply changes and close button.

       Info
       title Note
       To cancel the prohibition, select the camera in the right part of the window and click the  button.

    7. Click the OK button (4).

       Info
       title Note
       If a you use the filter by owner is used owners for the Monitoring interface object, then its value is taken into account when configuring you configure prohibited cameras. If the user selects a the camera that is not isn't prohibited from viewing the live video in the  the Monitoring  interface window, they can enter the camera's function functional menu and select a the camera prohibited from viewing using the Camera menu item. To prevent this from happening, it is necessary to you must hide the Camera menu item using the MENU_CAMS_DISABLE_OPTION parameter of the HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor registry key ( see Registry keys reference guide for more details, see the Vertical solutions registry key, for information on how to work with the registry, see Working with Windows OS registry). When adding you add a camera to the list of cameras prohibited from viewing, the camera is not a camera isn't automatically removed from the previously created screens to which this camera was it is added.

15. To configure the authorization parameters for getting access to video, you must:

    1. Click the Authorization... button.
    2. In the Authorization window that opens, specify the login and passwordfor viewing the live video and a video from the archive in the Login and Password fields, respectively. If you don't specify the authorization parameters, then the user rights of the server to which the connection is performed are used.
       Image Added

16. If you want specific owners

are Owners

17. to be available for specific users on the

 

18. owners panel,

then

19. set the filter by owners:

    1. Click the Filter
 button (15)
20. 1. ... button.

    2. The Filter by owners window

appears

21. 1. opens. The list of available user-owner pairs is on the left side of the window, the list of selected

ones

22. 1. pairs is on the right one.

Image Removed

23. 1. Image Added

       Info
       title Note
       The list of owners is set on the

Control panel—see

24. 1. control panel, for details, see the section Operator's Guide: Regulatory and reference information.

Users

25. 1. You can configure users and their rights

are configured in the

26. 1. on the Users tab of the System settings

dialog box—

27. 1. window, for details, see

 Limiting access to the system objects administration, control and viewing functions

28. 1. the section Axxon PSIM Software Package: Configuration of users and permissions.

    2. Move the pairs between the lists using the Image Modified and Image Modified buttons.
    3. When you complete forming the list of user-owner pairs
is formed
29. 1. , click the Apply changes and close button.
30. Selected pairs of users and owners are displayed in the table (14).
31. Click the Apply button (16).

Configuration of the Monitoring interface Configuring the Monitoring interface object is now complete.

When a screen for you select the screen in Axxon PSIM based on which the Monitoring object has been created is selected in Axxon PSIM object is created, the Monitoring interface interface window is displayed.