Page History

To start creating create a report, click the System failures Image RemovedImage Added button.

A modal In the settings window opens. In this window, you can set the parameters needed to create the report.that opens:

You can set the following report parameters:

1. Object description. You can use this field to choose between two report modesFrom the Object description drop-down list, select one of three modes of creating a report:
   1. Report on all the system objects.
      Image Added
   2. Report on one system object.
      Image Removed
   Region,District andCity in which the objects are located. This information is configured on the Control panel − see
   2. Report on several system objects.
      Image Added
2. Select the required values from the Owner drop-down list. This information is set on the control settings panel (for more details, see the Editing regulatory and reference information page), as well as depends on the configured filter by owners in the Monitoring reports interface object (for more details, see Configuration of the Monitoring reports object). If you select a specific object (see step 1), then this parameter is hidden in the settings window.
3. From the Region, District, and City drop-down lists, select those regions, districts, and cities where the objects are placed. This information is set on the control settings panel (for more details, see the Editing regulatory and reference information
. If
4. page). If you select a specific object
is selected
5. (see step 1), then
these fields are
6. this parameter is hidden in the
report
7. settings window.
8. From the Failure type
. You can use this field to specify the failure type for which to create the report
9. drop-down list, select the options by which a report is created. You can also create a report on all
the
10. failures
within a certain time
11. that occurred within the set period.
    
Image Removed
12. Image Added
13. Set the values of the Beginning date,
 
14. Beginning time, End date,
 Beginning time, and End time. This setting is used for specifying
15. and End time fields to specify the time range of
the alarms
16. failure occurrences by which
the report will be generated
17. a report is created.
Sorting. You can use two sorting modes when creating a report:
18. From the Sorting drop-down list, select one of two modes:
    1. event—sorting
Sort
19. 1. by failures (cameras,
archive, etc.
20. 1. archives, and so on).
Sort
21. 1. time—sorting by the event beginning time.
       Image Added
22. Set the Duration more than checkbox so that a report displays only failures with the duration more than the set value. By default, the checkbox is cleared, that is, all failures within the set time interval get to report.
23. If you set the Duration more than checkbox, the following fields are displayed:
    1. Format—from the drop-down list, select the units to measure the failure duration: Days, Hours, Minutes, Seconds.
    2. Value—enter the failure duration.
       Image Added
24. If you want to create a report on alarms in the same way as on failures, that is, to specify the beginning of the alarm, its end, and its duration, then set the Alarms as failures checkbox (for more details, see Alarms as system failures report).
25. Set the Show comment checkbox to display failure reports in the comment start time.
    Image RemovedShow comment. Set this check box if it is necessary to display failure comments in the report (see Processing alarms).After you configure all the parameters, click the button Image Removed.
    You can see the report in a separate window.
    Image Removed
26. Click the OK button.

As a result, a report about system failures is created.
Example of a report on all failures (the Duration more than checkbox isn't set):
Image Added
Example of a report on failures with the duration greater than the Duration more than 10 minutes set value:
 Image Added
The new Duration field appears in the common data at the top of the page.
Creating a report about system failures is complete.