Go to documentation repository
Page History
...
| Section | |||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
...
POS PSIM | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\POS | Capture | 0, 1 | 1 | 1.0.0 and later | Defines whether to store log-files or not. |
x32: (x32)\POS | Dos2Win | 0, 1 | 1 | 1.0.0 and later | Detects encoding: |
x32: (x32)\POS | GlobalTextDelay | NA | 0 | 1.0.0 and later | Sets the shift of Text data from video to TextSearch. |
x32: (x32)\POS | Nohotkey | 0, 1 | 1 | 1.0.0 and later | Allows disabling hot keys used for POSVIEWER and TITLEVIEWER. If Nohotkey = 1, then when clicking |
| x32:(x32)\POS x64:(x64)\POS | DecodeUtf8 | 0, 1 | 0 | 1.0.0 and later | The key enables the UTF-8 encoding to ensure the correct display of captions in cases when the incoming to the POS terminal packages have the UTF-8 encoding. |
x32: (x32)\POS | PosLogMaxsize | >0 | 10 | 1.0.0 and later | The key sets maximum size (in MBs) of the POS terminal’s log. Note. POS terminal logging is enabled using the Capture key – see above. |
| x32: (x32)\POS x64: (x64)\POS | SetFlowControlNone | 0, 1 | 1 | 1.0.0 and later | COM port control. Set to 0 if POS terminal fails to operate while connecting to POS PSIM. |
| x32: (x32)\POS x64: (x64)\POS | UseLocalTimestamp | 0, 1 | 0 | 1.0.0 and later | The key enables the received local timestamp conversion to UTC when creating a record in the corresponding POS PSIM database. 0 – received local timestamp will be recorded to the corresponding database without any changes. 1 – received local timestamp will be converted to UTC when creating a record in the corresponding database. |
| x32: (x32)\POS x64: (x64)\POS | UseLastCashierInfo | 0, 1 | 0 | 1.0.0 and later | In case the D-store POS-terminals are used, the key enables saving the info about the last cashier whose data was received by the POS-terminal. Until there is no data, the following default values are used: cashier_name = "Jane B."; cashier_number = "1147911"; 0 – the info about the last cashier whose data was received by the POS-terminal, is not saved. 1 – the info about the last cashier whose data was received by the POS-terminal, is saved. |
| x32: (x32)\POS x64: (x64)\POS | NewReceipt.Use | 0, 1 | 0 | 1.0.0 and later | In case the D-store POS-terminals are used, the key enables initiating the receipt creation by any data input. In addition to that, the text line specified in the NewReceipt.Word key (see below) is added to the receipt text. 0 – the receipt creation is initiated by the word specified to trigger the receipt creation. 1 – the receipt creation is initiated by any data input, and the text line specified in the NewReceipt.Word key (see below) is added to the receipt text. Note. This key works only if the UseLastCashierInfo key (see above) is enabled. |
| x32: (x32)\POS x64: (x64)\POS | NewReceipt.Word | String value | NEW RECEIPT | 1.0.0 and later | The key enables specifying the text line which will be added to the receipt text if the NewReceipt.Use key (see above) is enabled. |
| x32: (x32)\POS x64: (x64)\POS | PrintTime | 0, 1 | 0 | 1.0.0 and later | The key activates displaying in the Monitor the time (UTC) when each caption appeared. 0 – the captions timestamps (UTC) are not displayed in the Monitor. 1 – the captions timestamps (UTC) are displayed in the Monitor. |
| x32: (x32)\POS x64: (x64)\POS | WaitingBodys | 0, 1 | 0 | 1.0.0 and later | The key saves the beginning [PROLOG], middle [BODY], and end [EPILOG] of a receipt in the buffer and displays captions only after a receipt start event is received: 0—the beginning, middle, and end of a receipt aren't saved in the buffer; captions are displayed immediately 1—the beginning, middle, and end of a receipt are saved in the buffer; captions are displayed only after a receipt start event is received By default, the key isn't created, and its value is considered to be 0 |
IP integration (drivers and codecs pack for Axxon PSIM) | |||||
Registry section | String parameter | Available values | Default | Product version | Parameter in effect |
x32: (x32)\Video | ArchiveFps | 1-24 | 1.0.0 and later | Sets the number of frames recorded to the archive (max.resolution). LiveFps and ArchiveFps parameters are not to exceed 24 in total. | |
x32: (x32)\Video | DoubleStream | 0, 1 | 1.0.0 and later | Defines whether asynchronous video display mode is enabled or not. | |
x32: (x32)\Video | IpIntDrivers3 | Brand name: Axis; Acti, etc. | 1.0.0 and later | The IpIntDrivers3 string parameter is created and the names of brands that need 3.0 driver are listed. | |
x32: (x32)\Video | IpIntDriverVersion | 2, 3 | 1.0.0 and later | Defines the version number of loaded drivers: | |
x32: (x32)\Video | LiveFps | 1-24 | 1.0.0 and later | Sets the number of frames displayed in the 800x600 format. LiveFps and ArchiveFps parameters are not to exceed 24 in total. | |
x32: (x32) | LoadIpIntDirectly | 0, 1 |
| 1.0.0 and later | 1 – enable IntegratedDevice via video.run. If the setting is enabled and at least one IntegratedDevice is added, then other IP video capture cards are disabled. 0 – IIntegratedDevice operates as a separate run-module. |
| x32: (x32)\Video\TransportProtocols x64: (x64)\Video\TransportProtocols | <Driver name> | <protocol> | NA | DP 1.0.0 and later | The key is used to change a transport protocol used by the IP device. Example of the key value: "ONVIF"="tcp" means that TCP protocol is used to transfer data via ONVIF. See details in Changing Change the transport protocol used by IP - device Example of the key value: "rtsp"="multicast" allows enabling Multicast mode of the RTSP Server. The object configuration is required in addition to the key. See details inConfiguring Configuration of the RTSP Server module. |
x32: (x32)\Video\MetadataTransportProtocols | The name of camera driver (in the driver parameter of the C:\Program Files\ Common Files\ AxxonSoft\ Ipint.DriverPack \3.0.0\ Ipint.<Driver name>.rep file) | The name of transport protocol (is to be the same as one of the values specified in metadataTransportProtocol property in the corresponding .rep file). | NA | DP 1.0.0 and later | The key is used to change a metadata transport protocol. At the time of writing this documentation change of a metadata transport protocol was available for ONVIF driver only (possible values are tcp and udp). |
| x32: (x32)\Video x64: (x64)\Video | UnloadUnusedDriverTimeout | >=0 | 60 | DP 1.0.0 and later | The key sets unused driver unload timeout for cameras. For instance, if camera brand is in several drivers, all of them are loaded at camera connection. To unload the unused drivers, set non-zero value to this key. If the key is not created, then unused drivers are unloaded in 60 seconds. 0 – drivers do not unload (such behavior was in DriverPack versions older than the current one). The key value that is > 0 sets unused driver unload timeout. If the key is created but it consists of NaN value, then unused driver unload timeout is set to the default value – 60 seconds. |
x32: (x32)\TELEMETRY | PresetCompatibility | 0, 1 | NA | DP 1.0.0 and later | The key is used to enable the compatibility between presets in Axxon PSIM and previous versions of Drivers Pack, i.e. to decreasing the preset number by 1 when sending it to the driver. 0 – a new operation mechanism with presets the same as in Axxon One is in use in Axxon PSIM. If preset 1 is selected in Axxon PSIM interface, then value 1 is sent to the driver. 1, or if the key is not created – the compatibility mode is in use: if preset 1 is selected/created in Axxon PSIM interface, then value 0 is sent to the driver. |
x32: (x32)\Video | FFTHREADCOUNT | >=0 | 1 | DP 1.0.0 and later | The key sets the number of streams created in FFmpegDecoder. 0 – decoder automatically selects the number of created streams. >0 – sets the number of streams in use. By default if there is no key or the value is incorrect, then value 1 is in use. Auto selection of the number of streams can result in the system load reduction or its increase as the number of streams recreated during decoding increases – this affects the performance. |
x32: (x32)\EventSources | <brand>.<model> (for example, ONVIF.1_channel_device). If all models of some manufacturer require a specific method of getting events, then there must be a string key named <brand> in the section. | Pull point Meta data Disable | Meta data | DP 1.0.0 and later | By the date the documentation in created, this key is supported for three brands: ONVIF, RVi and IDIS. For models of these brands, the key is created automatically when the Drivers Pack is installed. The key sets a method of getting data about the analytics and the sensors of the device:
|
| x32: (x32)\Video\UseSsrcChecking x64: (x64)\Video\UseSsrcChecking | RTSP | enable disable | enable | DP 1.0.0 and later | The key is intended for setting up synchronization source (SSRC) for RTSP stream: enable – SSRC check enabled; disable – SSRC check disabled. |
x32: (x32)\Video | FFLOGDELAY | 0, 1 | 0 | CP 1.580 | Enables logging of delays of frames decoding and idle time for FFMPEG codec. |
| x32: (x32)\Video\TsConverters x64: (x64)\Video\TsConverters | <brand>.<model>, for example, Tattile.ANPR Mobile If all brand's models require a certain method of the timestamp adjustment, then the section must contain a string key with the name <brand>. |
| Depends on the brand | DP 1.0.0 and later | The keys in this section specify the method of the frame timestamp adjustment. If the key is not created, the timestamp transferred to the Axxon PSIM equals 0, and then the current time is set as its value. The None value is used if it is necessary to disable the adjustment and transfer the timestamp received from the camera as is. The ValidDeviceTs value means that the timestamp adjustment method is used before the timestamps transmission to the Axxon PSIM if the timestamp received from the camera differs from the current time by the value greater than the one specified in the MaxTimestampDeviation key (see below). After the adjustment, the timestamp calculated on the basis of the previous frame's timestamp and the time elapsed since its reception is transmitted to the Axxon PSIM. InfrequentTs value discards the relative timestamps, transferring 0 to the Axxon PSIM instead (i.e., the current time is set as the timestamp value), and it also transfers the absolute timestamps with the ETimestampValidityFlag flag. This adjustment method should be used for the devices with the license plates recognition which transfer the separate frames to the external system, rather than a continuous video stream. For some manufacturers, when installing the Drivers Pack, the keys with the necessary values are automatically created in the appropriate registry key. |
| x32: (x32)\Video x64: (x64)\Video | MaxTimestampDeviation | >=0 | NA | DP 1.0.0 and later | The key is used for the ValidDeviceTs key value from the TsConverters branch (see above). The key sets the maximum permissible deviation of the frame timestamp from the current Server time. |
| x32: (x32)\Video x64: (x64)\Video | ErrorSensitivity | 0, 1 | 0 | DP 1.0.0 and later | The key enables the interruption of the H.265 video decoding via the ffmpeg decoder in case of the slightest error in the video stream. 0 – if the video stream contains errors, then a buffer with artifacts will be received from the ffmpeg decoder. 1 – if the video stream contains errors, then an empty buffer will be received from the ffmpeg decoder. |
| x32: (x32)\Video\RTSP x64: (x64)\Video\RTSP | AudioSeparatedConnection | 0, 1 | 0 | DP 1.0.0 and later | Enables RTSP audio over a separate TCP connection. |
| x32: (x32)\Video x64: (x64)\Video | servicesVersion | auto, ver1, ver2 | auto | DP 1.0.0 and later | The key sets the version of ONVIF services (only for ONVIF and ONVIF 2.X): auto – get available versions and choose the latest if possible. ver1 – use old versions of services. ver2 – use new versions of services. |
| x32: (x32)\Video x64: (x64)\Video | servicesSource | getServices, getCapabilities | getServices | DP 1.0.0 and later | The key determines the source of the ONVIF services version (only for ONVIF and ONVIF 2.X): getServices – get a list of services using the new interface. getCapabilities – get a list of services using the old interface. |
| x32: (x32)\Video\Virtual x64: (x64)\Video\Virtual | playFileOnce | 0, 1 | 0 | DP 1.0.0 and later | Disables looping files in a virtual video capture device of a Virtual bench type. 0 – videos in a Virtual bench virtual capture device are played in a loop. 1 – videos in a Virtual bench virtual capture device are played once. See also Creating and configuring a virtual Video Capture Device. |
| x32: (x32)\TELEMETRY x64: (x64)\TELEMETRY | cgiPrefix | "/cgi-bin/ptz.cgi?", "/stw-cgi/ptzcontrol.cgi?" | - | DP 1.0.0 and later | The key is required for PTZ operation with Hanwha Techwin IP-devices: "/cgi-bin/ptz.cgi?" – for old models (not X-series) "/stw-cgi/ptzcontrol.cgi?" – for new models X-series |
x32: (x32)\Video | DecompressorResetOnErrorTimeout | 0 – 180 | 60 | DP 1.0.0 and later Compatibility: Axxon PSIM 1.0.0 and later | Time in seconds before the decompressor resets after an error. The value for the key should be selected empirically based on the stream parameters of a particular video camera. Attention! It is recommended to change the value for the key only with the assistance of technical support. |
| x32: (x32)\Video x64: (x64)\Video | IQS_ADDITIONTAL_VIDEO_FRAMES_COUNT | >=1 | 1 | DP 1.0.0 and later | The key sets the number of buffered decoded frames for the IntelQuickSync decoder. |
...
Monitoring PSIM | |||||
|---|---|---|---|---|---|
Registry section | String parameter | Available values | Default | Product version | Description |
x32: (x32-Monitoring) x64: (x64-Monitoring) | LPRDBsearchresultUnicodeBase64 | 0, 1 | 1 | 1.0 and later | The key sets how to process message in param0<> for the SEARCH_RESULT event of the LPRDB ("External database") object – as ANSI line or Unicode line additionally encoded in base64. 0 – ANSI 1 – UnicodeBase64 |
x32: (x32-Monitoring) x64: (x64-Monitoring) | PeakWorkingSetSizeQuota | >=0 | 100 | 1.0 and later | The maximum memory size in megabytes used by the process videosrv.exe on Agent Of Control. If the parameter is set to 0, then the check for the used memory is not performed. Once a day, the Agent Of Control checks the size of the memory it uses. The check is performed at the time specified by the TimeOfCheckWorkingSetSize key (see below). After exceeding the specified value, the videosrv.exe module is rebooted. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | TimeOfCheckWorkingSetSize | >=0 | 3 | 1.0 and later | Time to check memory usage in hours. Default value is 3 (3:00 AM). See also the PeakWorkingSetSizeQuota key description above. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | StoreVideoFiles | >0 | 3 | 1.0 and later | Time period for storage of not completely downloaded files on Agent Of Control. After the storage period is exceeded, the not completely downloaded files are deleted. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | run_core | 0.1 | 1 | 1.0 and later | The key sets the Agent Of Control actions in case if the Axxon PSIM software is shut down. 0 – do not start the Axxon PSIM software 1 – start the Axxon PSIM software |
x32: (x32-Monitoring) x64: (x64-Monitoring) | socket_connect_tout | >=0 | 0 | 1.0 and later | The key defines TCP/IP connection mode with Server Of Control. 0 – blocking mode. Agent Of Control connects to Server Of Control without specifying connection timeout. >0 – non-blocking mode. Agent Of Control connects to Server Of Control with a connection timeout set by the socket_connect_tout > 0 parameter in seconds. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | write_buffer_enable | 0.1 | 1 | 1.0 and later | Data buffering while recording on disc when receiving video data on Server Of Control. Agent Of Control transfers video data to Server Of Control in packages of 800 to 4096 bytes (4096 by default). When buffering is enabled, a 264 Kb block of memory is allocated to the Server Of Control for receiving video data, and data is saved to the disk when this memory block is full, not every time a packet is received from Agent Of Control. 0 – buffering is enabled. 1 – buffering is disabled. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | stop_data_by_trx | 0.1 | 1 | 1.0 and later | The key determines the actions of Agent Of Control in case if, during the transfer of video data to ATM PSIM ARM, a financial transaction has begun on the ATM PSIM. 0 – video data transfer is not stopped. 1 – video data transfer is suspended until financial transaction if completed. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | IPPort | > 0 | 7755 | 1.0 and later | The key specifies the port on the Server Of Control/Central Server Of Control used for connecting the clients. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | financial_trx_tout | >0 | 60 | 1.0 and later | Timeout for waiting for the financial transaction to complete in minutes. If after the start of the financial transaction during the time-out, there is no message from the ATM about its end, it will be considered to be completed. |
x32: HKLM\SOFTWARE\BitSoft\VHOST\ULPR x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\VHOST\ULPR | ULPRspecialProcessing | >=0 | NA | 1.0 and later | The key enables special operation mode of the Monitoring PSIM software joint with Auto PSIM. 1 – the special operation mode of the Monitoring software joint with Auto PSIM is enabled. Any other value – the special operation mode is disabled. Note. The key is created both on Agent Of Control and Server Of Control. |
x32: HKLM\SOFTWARE\BitSoft\VHOST\ULPR x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\VHOST\ULPR | PlaceOfRecognitionN | 1,2 | NA | 1.0 and later | 2 – exit. Note 1. The key is in use in special operation mode of the Monitoring PSIM software joint with Auto PSIM. Note 2. The key is created at Agent Of Control |
x32: HKLM\SOFTWARE\BitSoft\VHOST\ULPR x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\VHOST\ULPR | CamOfRecognitionN | >0 | NA | 1.0 and later | This parameter corresponds to the ID of a camera added to the recognition module. CamOfRecognitionN, where N is the ID of the LPR channel object. The value of this parameter corresponds to the Camera object ID specified in the LPR channel object settings. Note 1. The key is in use in special operation mode of the Monitoring PSIM software joint with Auto PSIM. Note 2. The key is created at Agent Of Control |
x32: HKLM\SOFTWARE\BitSoft\VHOST\ULPR x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\VHOST\ULPR | AlarmMsgOne | >=0 | NA | 1.0 and later | The key enables the LP found in the database alarm both for Entrance and Exit recognition points. 0 – enables the LP found in the database alarm both for Entrance and Exit recognition points. Any other value – the LP found in the database alarm is generated for Entrance recognition point only. Note 1. The key is in use in special operation mode of the Monitoring software joint with Auto PSIM. Note 2. The key is created at Server Of Control |
x32: (x32-Monitoring) x64: (x64-onitoring) | TimeAlarmFromAgent | 0, 1 | 0 | 1.0 and later | The key enables registration of the alarm with the time it occurred on the site. 0 – In the Alarm date field in the interface objects, the time of loading the alarm into the database after it is received from the Agent Of Control is shown, not the time of occurrence of the alarm on site. 1 - In the Alarm date field in the interface objects, the time of alarm occurrence on site is shown. Note. The key is set on the Server Of Control. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | FileQueryEnable | 0, 1 | 0 | 1.0 and later | The key enables automated video clip loading. 0 – automated video clip loading is disabled. 1 – automated video clip loading is enabled. Note. The key is created at Server Of Control and/or Additional Workstation |
x32: (x32-Monitoring) x64: (x64-Monitoring) | FileQueryPath | Text | C:\Query\ | 1.0.0 and later | The key sets folder to share data with third party systems which is necessary for automated video clip loading. Note. The key is created at Server Of Control and/or Additional Workstation |
x32: (x32-Monitoring) x64: (x64-Monitoring) | OldLogPanel | 0, 1 | 0 | 1.0 and later | The key changes the Log Panel interface color theme. 0 - dark interface theme. 1 - light interface theme. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | StreamViewerExportPath | Text | <Axxon PSIM installation directory>\export | 1.0 and later | The key specifies the path to the catalog of frames and video clips which were exported from the Monitoring PSIM interface during the live and archive video playback from a certain camera. See Playing back live video and archive from a specific camera. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | MonitoringReserving | 0, 1 | 0 | 1.0 and later | The key removes the restriction on adding the same cameras for tracking in different Partitions Of Control. 0 - the restriction is enabled. 1 - the restriction is removed. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | AccessByCardEnable | 0, 1 | 0 | 1.0 and later | The key activates the special mode of Monitoring PSIM operation together with ACFA PSIM, as well as the ability to customize the long alarm description. 0 - Special operation mode is off. 1 - Special operation mode is on. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | CustomisedLongAlarmName | Text | Object disarmed | 1.0 and later | The key changes the description of the long alarm Object disarmed in the Monitoring and Monitoring reports interface objects. |
x32: HKLM\SOFTWARE\BitSoft\MonitorSSTV\Loader x64: HKLM\SOFTWARE\Wow6432Node\BitSoft\MonitorSSTV\Loader | UseBulkInsert | 0, 1 | 1.0 and later | The key accelerates the speed of data loading from files to the MonitorSSTV database by activating the group operator of data loading if the database is installed locally. 0 - do not use the BULK INSERT operator (if the SQL Server is remote) | |
x32: (x32-Monitoring) x64: (x64-Monitoring) | PostfixForTimeOut | Text | NA | 1.0 and later | The key specifies the postfix in the identifier of the Partitions Of Control for which the waiting timeout specified in the TimeoutForPostfix key should be specified. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | TimeoutForPostfix | >0 | 6 | 1.0 and later | The key sets the waiting timeout in minutes for the Server Of Control to receive the packets with the technical state of Agent Of Control. After this time the "No connection" error will be displayed. |
| HKEY_CURRENT_USER\SOFTWARE\BitSoft\MonitorSSTV | MAXRECORDSONPAGE | 1,000 - 2,000,000,000 | 10,000 | 1.0 and later | Sets the maximum number of events to be displayed in the Event Log window without navigation buttons. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | PassiveModeForFTP | 0, 1 | 1 | 1.0 and later | The key sets the operation mode of the Central Server Of Control software via FTP. 0 - Active mode. 1- Passive mode. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | PeriodRequestOfStatistic | > 0 | 5 | 1.0 and later | The key sets the statistics polling period in minutes for the Servers Of Control. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | LogArchPeriod | > 0 | 168 | 1.0 and later | The key sets the log archiving period in hours of the Communication module (CentralNetServer.log) |
x32: (x32-Monitoring) x64: (x64-Monitoring) | LogMaxSize | > 0 | 100 | 1.0 and later | The key sets the maximum size of the communication module log file at which it begins to archive ignoring the LogArchPeriod parameter. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | LogArchDelPeriod | > 0 | 3 | 1.0 and later | The key sets the log files archive retention period in months (CentralNetServer.log). |
x32: (x32-Monitoring) x64: (x64-Monitoring) | KeepDB | > 0 | 6 | 1.0 and later | The key sets the data retention period of closed errors and alarms in the ServerSSTV DB. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | LastLoadThreshold | >= 0 | 30 | 1.0 and later | The key sets the time in minutes, after which, if the data in the MonitorSSTV database is outdated, the corresponding indication on the Server Of Control/CSC will appear. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | DisableMonitoring | 0, 1 | 0 | 1.0 and later | The key disables the ability to accept alarms and force error closing. 0 - the ability to confirm alarms and force error closing is enabled. 1 - the ability to confirm alarms and force error closing is disabled. If the key is set to 1, then:
|
x32: (x32-Monitoring) x64: (x64-Monitoring) | StreamViewerLowestPriority | 0, 1 | 0 | 1.0 and later | The key sets low priority of the StreamViewer process when it starts. 0 − The StreamViewer process starts with normal (medium) priority. 1 − The StreamViewer process starts with low priority. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | SleepAfterDisarm | integer in msec | 50 | 1.0 and later | The key sets the time interval of recording delay in msec after disarming the camera |
x32: (x32-Monitoring) x64: (x64-Monitoring) | SleepAfterRecStop | integer in msec | 50 | 1.0 and later | If the continuous recording mode is enabled, the key sets the time interval of recording delay by camera in msec after it stops. If the camera is armed, the key sets the time interval of camera arming delay in msec after it stops |
x32: (x32-Monitoring) x64: (x64-Monitoring) | KeepVideoDataInBase | > 0 | 0 | 1.0 and later | If the parameter isn’t created or equals 0, the video data isn’t stored in the Monitoring database (MonitorSSTV or ServerSSTV). If the parameter > 0, its value equals the number of days the video data should be stored in the Monitoring database. When this period is exceeded, the video data is deleted from the database |
| Restricting the Operator’s access to the camera's functional menu and its options | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the camera's menu. 0 - The menu is displayed. 1 - The menu is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_ARM_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Arm menu option. 0 - The Arm menu option is displayed. 1 - The Arm menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_REC_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Start recording menu option. 0 - The Start recording menu option is displayed. 1 - The Start recording menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_CAMS_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Camera menu option. 0 - The Camera menu option is displayed. 1 - The Camera menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_TITLES_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Show titles menu option. 0 - The Show titles menu option is displayed. 1 - The Show titles menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Processing menu option. 0 - The Processing menu option is displayed. 1 - The Processing menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_EXPORT_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Export menu option. 0 - The Export menu option is displayed. 1 - The Export menu option is hidden. |
| Restricting the Operator’s access to the Processing menu within the camera's functional menu | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_DEINTERLACE_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Deinterlacing menu option. 0 - The Deinterlacing menu option is displayed. 1 - The Deinterlacing menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_ZOOM_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Zoom-in menu option. 0 - The Zoom-in menu option is displayed. 1 - The Zoom-in menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_CONTRAST_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Contrast menu option. 0 - The Contrast menu option is displayed. 1 - The Contrast menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_MASK_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Detector mask menu option. 0 - The Detector mask menu option is displayed. 1 - The Detector mask menu option is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | MENU_PROCESSING_SHARPNESS_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Sharpen menu option. 0 - The Sharpen menu option is displayed. 1 - The Sharpen menu option is hidden. |
| Restricting the Operator’s access to the CamMonitor component buttons | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_ARCH_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Archive button. 0 - The Archive button is displayed. 1 - The Archive button is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_TIME_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the time. 0 - The time is displayed. 1 - The time is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_NAME_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the camera name. 0 - The camera name is displayed. 1 - The camera name is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | BUTTON_MENU_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key hides the Menu button. 0 - The Menu button is displayed. 1 - The Menu button is hidden. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64: HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor
| PANEL_DISABLE_OPTION | 0, 1 | 0 | 2.0 and later | The key hides the toolbar that also contains the FPS, frame size, and stream resolution: 0—the toolbar is displayed 1—the toolbar is hidden |
| Restricting the Operator’s access to the CamMonitor control via the keyboard and mouse | |||||
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | KEYS_DISABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key disables the control over the CamMonitor component using the hotkeys available for Video Monitor (see Video surveillance monitor). 0 - The control over the CamMonitor component using the hotkeys is enabled. 1 - The control over the CamMonitor component using the hotkeys is disabled. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | TELEMETRY_ENABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key enables the Telemetry control using the CamMonitor component (see Telemetry control). 0 - The Telemetry control using the CamMonitor component is disabled 1 - The Telemetry control using the CamMonitor component is enabled. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | ARCH_DELETE_ENABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key activates the Delete menu item which is used to remove the recordings from the archive (see Deleting video recordings Delete videos from the archive). 0 - The Delete item is hidden. 1 - The Delete item is displayed. |
x32: HKEY_LOCAL_MACHINE\SOFTWARE\BitSoft\VHOST\CamMonitor x64:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\BitSoft\VHOST\CamMonitor | ARCH_PROTECT_ENABLE_OPTION | 0, 1 | 0 | 1.0 and later | The key activates the Protect menu item which is used to protect the archive recordings from rewriting (see Protection of separate record and disable of protection). 0 - The Protect item is hidden. 1 - The Protect item is displayed. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | RequestFullStatisticOnStartup | 0, 1 | 0 | 1.0 and later | By default, the Central Server Of Control requests a complete package of statistics from all Servers Of Control only once, when it first connects to the Servers Of Control. The key activates the request on the Central Server Of Control for a complete statistics package from all Servers Of Control every time the CentralNetServer.exe communication module is launched. 0 - disabled. 1 - a complete statistics package will be requested from all Servers Of Control each time the CentralNetServer.exe communication module is launched. Attention! Requesting a complete statistics package is a resource-intensive operation. It is only necessary to activate this key if absolutely necessary. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | RequestFullStatistic[N] Note. [N] is the internal identifier of the Server Of Control object in Axxon PSIM | 0, 1 | 0 | 1.0 and later | By default, the Central Server Of Control requests a complete package of statistics from all Servers Of Control only once, when it first connects to the Servers Of Control. The key activates the request for a complete statistics package from a specific Server Of Control once. The request will be executed when the CentralNetServer.exe communication module is launched, and the value of this key will automatically change to 0. 0 - disabled. 1 - a complete statistics package from a specific Server Of Control will be requested once when the CentralNetServer.exe communication module is launched. Attention! Requesting a complete statistics package is a resource-intensive operation. It is only necessary to activate this key if absolutely necessary. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | FtpPath | Text | <Axxon PSIM installation directory>\Vhost\DATA\FTP\ | 1.0 and later | Sets the path to the FTP directory on the Server Of Control for working with the Central Server Of Control. |
x32: (x32-Monitoring) x64: (x64-Monitoring) | ExportPath | Text | DISK:\Export\ , where DISK is the drive on which the operating system is installed | NA | Sets the path to the export directory on the Server Of Control |
...
Overview
Content Tools